Siemens HiPath 4000 Operating Instructions Manual page 34

Forwarding calls
Step by Step
Store
Call forwarding
Call forwarding
rfe
or
or
n
or and
or
Disconnect/Clear
Store
Call forwarding
n
or and
or
Call forwarding
n
or and
or
34
Cancelling a destination
Press the key. The lamp lights up.
Press the key.
Press the key again.
Without pressing the keys first:
rhm
UK code or Standard code.
rmj
Euro code.
If the "store" and "call forwarding" keys are not config-
ured on your telephone:
rfe
Lift the handset and enter the UK code.
rij
Special code (not for UK).
Press the key.
Press the key. The lamp goes out.
t
If you have already lifted the handset and entered the
special code:
Replace the handset.
Deactivating call forwarding
Press the key. The lamp goes out.
If your telephone does not have a "call forwarding" key:
ree
Lift the handset and enter the UK code
rhh
or Standard code.
t
Replace the handset.
Activating call forwarding
Press the key. The lamp lights up.
If your telephone does not have a "call forwarding" key:
qee
Lift the handset and enter the UK code
qhh
or Standard code.
t
Replace the handset.