Replace The High And Low Beam Bulbs - Ducati SUPERBIKE 899 PANIGALE Owner's Manual

Replace the high and low beam bulbs

Before replacing a burnt-out bulb, make sure that the
HI HI
new one matches the voltage and wattage
1
specifications in paragraph "Electric System" page
247.
Always ensure that the new bulb you have installed
operates properly before refitting any parts you have
LO
removed. Figure shows the locations of the low beam
LO
bulbs (LO), high beam bulbs (HI) and the parking light
LED light unit (1).
Fig. 141
219