Table of Contents
Advertisement
Entering the PIN CODE
To activate the PIN CODE function and enter your
own PIN CODE you must open the SETTING MENU.
Select "PIN" option, by pressing button (1) or (2). Once
function is highlighted, press CONFIRM MENU
button (4).
When entering the function, the display shows the
message "N:" (new) followed by four flashing dashes
"- - - -".
Entering the code:
1) Press button (4), only one digit indicating "0"
starts flashing;
2) Each time you press the button (2) the displayed
number increases by one (+ 1) up to "9" and then
starts back from "0";
3) Each time you press the button (1) the displayed
number decreases by one (- 1) up to "1" and then
starts back from "0";
4) To confirm the number, press the button (4);
Repeat the procedures until you confirm all the digits
of the PIN CODE.
123
Advertisement
Table of Contents
