Changing the PIN CODE
To change the existing PIN CODE and activate a new
one, you must open the SETTING MENU.
Select "PIN" option, by pressing button (1) or (2). Once
function is highlighted, press CONFIRM MENU
button (4). When entering the function, the display
shows the message " O:" (old) followed by four
flashing dashes "- - - -".
Entering the "old" code:
1) Press button (4), only one digit indicating "0"
starts flashing;
2) Each time you press the button (2) the displayed
number increases by one (+ 1) up to "9" and then
starts back from "0";
3) Each time you press the button (1) the displayed
number decreases by one (- 1) up to "1" and then
starts back from "0";
4) To confirm the number, press the button (4);
Repeat the procedures until you confirm all the digits
of the PIN CODE.
126