Riding Mode Customisation: Abs Adjustment - Ducati SUPERBIKE 899 PANIGALE Owner's Manual

Riding mode customisation: ABS
adjustment
This function disables or sets ABS level for the
selected riding mode. Enter the SETTING MENU.
Select the R.M. (Riding mode) option by pressing
button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4).
Enter the R.M. (Riding mode) Menu. Select the
desired riding mode (RACE, SPORT or WET), by
pressing button (1) or (2).
After selecting the desired riding mode (arrow beside
the flashing riding mode), press the MENU
CONFIRMATION button (4). You open the selected
riding mode customisation Menu. Select the
parameter to be customised (ABS), by pressing
button (1) or (2). Once desired parameter is
highlighted, press CONFIRM MENU button (4).
When entering the function, the currently set ABS
level or status starts flashing. Use buttons (1) and (2)
to select the new desired intervention level or the
symbol " − " (that identifies the "OFF" status) and
press button (4) to confirm. The value will become
automatically steady and the message "EXIT" will be
highlighted.
108
To exit the menu and go back to previous page, select
"EXIT" and press button (4). The instrument panel will
go back to the previous level and will automatically
highlight the message "MEMORY".
Note
To save the new ABS parameter setting follow
the procedure "Storing Riding Mode settings"
described in paragraph "Storing Riding Mode
settings". If the user quits the Riding Mode
customisation menu without performing the storing
procedure, the just-selected settings will be lost.
Note
When you enable or disable the ABS through
this function, i.e. toggling from disabled to enabled
system or vice-versa, the procedure for activating or
deactivating the ABS is carried out: the change of
status of the ABS control unit is not instantaneous, it
requires at least 6 seconds.