Table of Contents
Advertisement
If the motorcycle is equipped with GPS, the lap "Start/
3
Stop" command is sent by the GPS. In order for the
GPS to identify each lap's "Start/Stop" automatically,
the user must store the finish line coordinates by
pressing the FLASH button (3) when passing the
finish line for the first time. Upon storage the
message "GPS" will flash quickly and then return
steady.
Stored finish line coordinates are retained after Key-
OFF and remain valid if the stored GPS finish line is
within a range of 15 km from the current position,
whereas they are updated each time FLASH button
(3) is pressed while the LAP function is active. If a
stored finish line is stored anew, the message "GPS"
will flash quickly and then return steady.
3
Fig. 34
74
Advertisement
Table of Contents
