Ducati SUPERBIKE 899 PANIGALE Owner's Manual page 76

Hide thumbs Also See for SUPERBIKE 899 PANIGALE:
Table of Contents

Advertisement

If lap timer is active but motorcycle is at standstill, lap
timer is temporarily stopped after 5 seconds and it is
displayed with the initial indication "0'00''00". the next
time rider pushes the FLASH button (3) or any
equivalent command (optional GPS), lap timer is
reactivated.
Note
When the LAP function is active, the FLASH
button takes on the dual function of high beam
"FLASH" and LAP timer start / stop (new lap start
indication).
Note
The TRIP FUEL function always has top priority
over the LAP function: in case of activation of the
TRIP FUEL function with active LAP function, the LAP
timer view is automatically removed and TRIP FUEL
information is displayed instead.
LAP recording
If the LAP function is active, it is possible to record
the lap time, for a total of 30 consecutive laps.
Operation:
-
When the FLASH button (3) is pressed for the
first time, or upon an equivalent command
(optional GPS), the instrument panel displays the
timer with resolution of a tenth of a second
("0'00''0");
-
the next times the FLASH button (3) is pressed,
or after an equivalent control (optional GPS), the
instrument panel displays for 5 seconds the just-
ended lap time with a resolution of a hundredth
of a second;
-
after these 5 seconds, the instrument panel goes
back to lap timer page referred to the new current
lap.
-
if motorcycle remains at standstill for over 5
seconds, lap timer is temporarily stopped and it
is displayed with the initial indication "0'00''00";
-
the next time rider pushes the FLASH button (3)
or any equivalent command (optional GPS), lap
timer is reactivated.
If the time is never stopped, it will roll over upon
reaching 9 minutes, 59 seconds and 99 hundredths;
the lap timer starts counting from zero and will keep
running until the lap is stopped or the recording
function is disabled.
75

Advertisement

Table of Contents
loading

Table of Contents