Table of Contents
Advertisement
Laps are numbered from 01 to 30 and are in a loop:
after the first 30 laps the instrument panel will
overwrite information starting from Lap 01.
If the LAP function is interrupted and then reactivated
but memorised laps are not deleted, lap information
will be recorded by overwriting data of the oldest Lap.
Example: if you rode 34 laps without deleting data,
the instrument panel stores the first 30 laps and then
overwrites the first 4 laps. Upon the following Key-
ON or reactivation of the LAP function, if no data were
deleted, the instrument panel will continue storing
data from Lap 05.
During every lap, the following data are stored:
-
no. 30 lap times (time between consecutive start
and stop);
-
no. 30 values for max. RPM (maximum RPM
value reached in every lap);
-
no. 30 values for max. speed (maximum speed
value reached in every lap).
76
Advertisement
Table of Contents
