When you press button (4) to confirm the fourth and
last digit, the instrument panel highlights the
message "MEMORY" and the relevant box.
To save the new setting, hold button (4) for 2 seconds
while the message "MEMORY" is highlighted.
If settings have been saved, the message
"MEMORY" and the relevant box will be shown
steady ON for 2 seconds, and then the message
"EXIT" will be highlighted.
If settings have not been saved, the instrument panel
highlights again the string of four dashes "- - - -" of the
new PIN to allow the rider to try again and enter a
new code.
4
1
4
2
1
2
Fig. 70
131