It is possible to erase the memorised LAPs also in the
DATA sub-menu. When entering the DATA page, the
instrument panel shows the memorised lap
information (ref. to paragraph "Displaying the stored
LAPs").
Press button (4) to highlight the message "ERASE".
User must confirm deletion by pressing button (4) for
2 seconds.
After 2 seconds, the instrument panel display shows:
-
five flashing dashes "- - - - -" for 3 seconds;
-
"OK" for 2 seconds to inform about the result of
the deletion process.
Deletion is one single command that erases all stored
laps.
After deletion, the Laps "01" to "30" are displayed with
all parameters showing an indefinite value "–" (time =
-' - -'' - - , rpm = - - - - - , speed = - - - ).
To exit the menu and go back to previous page, select
"EXIT" and press button (4).
1
4
2
4
Fig. 79
145