Adjusting the front fork
The front fork used on this motorcycle has rebound,
compression and spring preload adjustment.
Adjustment is done by external screw adjusters.
1) For rebound adjustment (1, Fig. 111);
2) For compression adjustment (2, Fig. 111);
3) For spring preload adjustment (3, Fig. 112);
Put the motorcycle on the side stand and make sure
it is stable.
Turn adjuster (1) at the top end of each fork leg with
a flat-blade screwdriver to adjust rebound.
Turn adjuster (2) at the top end of each fork leg with
a flat-blade screwdriver to adjust compression.
1
3
2
Fig. 111
Fig. 112
185