Turn adjusters (1) and (2) to adjust damping. The
stiffest damping setting is obtained with the adjuster
turned fully clockwise to the "0" position. Starting
from this position, turning counter clockwise, you can
count the turns.
To change preload of the spring inside each fork leg,
turn the hex. adjuster (3, Fig. 112) with a hexagon
wrench, starting from the fully open (clockwise)
position.
STANDARD settings are as follows:
compression: 4 turns (from fully closed position);
rebound: 5 turns (from fully closed position);
spring preload: 4 turns (from fully open position).
Warning
Set both leg adjusters on the same positions.
186