Table of Contents
Advertisement
DDA enable/disable
To enable / disable the DDA device enter the
SETTING MENU. Select "DDA" option, by pressing
button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4).
You open the "DDA" menu.
When entering this function the display shows the
currently set DDA status: status ON indicates that the
DDA is active, otherwise status will be OFF.
Press buttons (1) and (2) to select the new desired
status (flashing) and press button (4) to confirm.
The set status value will be updated and the message
will return steady.
To exit the menu and go back to previous page, select
"EXIT" and press button (4).
Note
The DDA is automatically disabled by the
instrument panel upon every Key-OFF.
118
Advertisement
Table of Contents
