Using A Transmission Log To Resend - Sharp MX-3050N User Manual

FACSIMILE►ENTERING DESTINATIONS

USING A TRANSMISSION LOG TO RESEND

Select a destination from a transmission log and resend the data.
The destinations of the most recent 50 transmissions by fax, Scan to E-mail, and/or Internet fax are stored. One of these
can be selected to resend to that destination. The destinations of the FTP/Desktop transmission and Scan to Network
Folder are also shown in the transmission log.
In normal mode, you can also add an address in a transmission history to the address book. This is a convenient way to
store the fax numbers and addresses of destinations that were manually entered. However, addresses of the Network
Folder transmission cannot be stored from the machine.
• If numeric keys were tapped during the previous transmission, the number may not be redialed correctly.
• The fax addresses below are not stored as addresses for which resend is possible.
• One-touch key for a contact in which multiple destinations are stored.
• Group destinations
• Broadcasting destinations
In Easy mode
1
Original
Address
8½x11
Address Book
CA
Preview
In Normal mode
Address
Address Book
Exposure
Auto
Resolution
Super Fine
Original
Job Build
Slow Scan Mode
Mixed Size Orig.
Original Count
Others
Fax Number
Sending History Direct Entry
Fax Number Sending History
Call Search Number
Direct TX
Call Program
Call Registered settings
Check Send/Receive
Status
Send Same Image
as Fax Address
Preview
Scan Size Send Size
100%
Auto Auto
8½x11 8½x11
Speaker
reception memory 100%
Tap the [Sending History] key.
Detail
Start
In the base screen or address book
screen, tap [Sending History] on the
action panel.
CA
Start
4-18