Sharp MX-3050N User Manual page 181

COPIER►BASIC PROCEDURE FOR MAKING COPIES
4
Original
8½x11
Paper
2-Sided Copy
Select
8½x11
Tray 1
CA
Preview
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper tray manually.
Tap the [Preview] key.
5
Tap the [Color Start] or [B/W Start] key.
6
7
Original
A4 Place next original. Press [Start].
When finished, press [Read-End].
Paper
Select
A4
Tray 1
CA
Tap the [Read-End] key to start copying.
8
Detail
Copy Ratio Staple / Punch
100% Off
1 → 1
Copies
B/W Color
Start Start
Detail
Staple / Punch
Off
Read-End
Copies
B/W Color
Start Start
Check the paper (tray) and color mode
you want to use for copying, and tap
the keys for any other settings you
want to select.
Tap the [Original] key and specify the orientation of the
original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
• Paper Select ►page 2-13
• Copy Ratio ►page 2-26
• Staple / Punch ►page
• Color Mode ►page 2-20
• Original ►page 2-33
• Exposure ►page 2-23
• N-Up ►page 2-49
• Card Shot ►page 2-52
Set the next original, and tap the
[Color Start] or [B/W Start] key to scan
the original.
Tap the same key you tapped in step 5.
Repeat this step until all originals have been scanned.
2-19
2-42, ►page 2-45