Sharp MX-3050N User Manual page 265

COPIER►OTHER FUNCTIONS
5
Others
Custom Image
Select Image to Operate.
Off
Custom
Stamp
Custom
Watermark
(3)
Back
• To cancel the custom image setting:
Tap the [Off] key.
• To cancel all settings:
Tap the [CA] key.
Tap the [Color Start] or [B/W Start] key to start copying.
6
For settings related to custom stamp and custom water mark, see the following table.
For custom stamp
Print Page
Print Position
Print Angle
For custom watermark
Print Color
Print Pattern
Exposure
Print Page
Print Position
Print Angle
Original
Change Size/Direction.
Stamp
Print Date and Stamp
(4)
Color Mode
Image (5) 2-Sided Copy
Not
N-Up
Put Multiple Pages in A Page
Print Page
First Page
X: 0 mm
Print Position
Y: 0 mm
Preview
Print Angle 0°
Print on cover/insert when
B/W
Start
4 11x17
Specify a page(s) for stamp copy. First Page or All Pages
Specify a position for stamp copy.
Specify the corner of the image. 0 degrees, -90 degrees, 90 degrees, or 180 degrees
Specify the image watermark color. Black, red, green, blue, cyan, magenta or yellow.
Specify the image watermark print pattern.
Transparent: Makes an original image transparent for stamp copy.
Overlap: Hides a watermark added to an original image for stamp copy.
Select the exposure of a watermark from nine levels.
Specify a page(s) for stamp copy.
First Page or All Pages
Specify a position for stamp copy.
Specify the corner of the image. 0 degrees, -90 degrees, 90 degrees, or 180 degrees
Set [Print Page] or [Print Position].
After the settings are completed, tap
sequence.
CA
Color
Start
2-103
and [Back] keys in