Staple Position - Sharp MX-3050N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES
Staple ON (excluding booklet)
Tap the [Staple / Punch] key.
1
► COPY MODE (page 2-3)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
2
Staple / Punch
Staple
Off
Punch
Off
CA
Preview
In normal mode
• Tap the [Staple Sort] key.
Staple Sort
Off
1 Staple
2 Staples
Stapleless Staple
Others
• If you need to change the output tray, tap the [Output Tray] key and select the output destination before selecting
stapling.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap [Continue] or [Cancel].
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
Position
Copies
B/W
Start
Original
No. of copies
1
Change Size/Direction.
Sort/Group
Change Sort/Group
Punch

Staple Position

Punch Holes
Left
Color Mode
N-Up
Up
Put Multiple Pages in A Page
Right
Original
Preview
Output Tray Offset
B/W
Start
4 11x17
Select the number of staples and
staple position.
• After the settings are completed, tap
• A binding position cannot be selected for stapleless
stapling.
Color
Start
CA
Color
Start
2-43
.