Saddle Stitch Finisher (Large Stacker); Part Names - Sharp MX-3050N User Manual

BEFORE USING THE MACHINE►PERIPHERAL DEVICES
SADDLE STITCH FINISHER (LARGE
STACKER)
This includes the offset function that outputs sorted paper while staggering each set of paper, the staple sort function
that staples each set of prints, the saddle stitch function that automatically staples the center of the sheets and folds the
sheets in half, and the paper folding function that folds paper in half. You can also perform stapling manually.
To punch holes in printed paper, install an optional hole punch module.

PART NAMES

(1)
(5)
(1) Output tray (upper tray)
The tray is slidable. To print on large paper such as A3
paper, extend the tray.
(2) Output tray (lower tray)
Stapled and offset output is delivered to this tray.
The tray is slidable. To print on large paper such as A3
paper, extend the tray.
(3) Manual staple key
Press to execute manual stapling.
(4) Top cover
Open this cover to remove a paper misfeed.
• To install a saddle stitch finisher (large stacker), a paper pass unit and stand/550/2x550/3x550/550&2100 sheet paper
drawer are required.
• Do not place heavy objects on the saddle stitch finisher (large stacker) or press down on the saddle stitch finisher (large
stacker).
• Exercise caution when you turn on the power and when printing take place, as the tray may move up and down.
• A saddle stitch finisher (large stacker) cannot be installed simultaneously with an inner finisher, finisher, finisher (large
stacker) or saddle stitch finisher.
(2) (3) (4)
(6) (7) (8)
(5) Insertion slot
Place the paper that you want to staple in this slot.
Maximum thickness 23/64" (9 mm).
(6) Saddle stitch tray
Saddle-stitched output is delivered to this tray.
(7) Front lower cover
Open this cover to replace the staple cartridge, remove a
staple jam, or remove a paper misfeed.
(8) Front upper cover
Open this cover to replace the staple cartridge, remove a
staple jam, or remove a paper misfeed.
1-123