Original Size; Transmittable Original Sizes; The Size Of The Placed Original - Sharp MX-3050N User Manual

SCANNER/INTERNET FAX►BEFORE USING THE MACHINE AS A NETWORK SCANNER

ORIGINAL SIZE

TRANSMITTABLE ORIGINAL SIZES

The following original sizes can be transmitted
Using the automatic document feeder
Using the document glass
*A long original can be transmitted.

THE SIZE OF THE PLACED ORIGINAL

When a standard size original is placed, the original size is automatically detected and displayed in "Scan Size" on the
based screen.
SCAN SIZE AND SEND SIZE (ENLARGE/REDUCE) (page 5-45)
►
Standard sizes are sizes that the machine can automatically detect. The standard sizes are set in "Original Size
Detector Setting" in "Settings".
When the automatic original detection function is operating and the original (of inch or non-standard size) is placed, the
closest standard size may be displayed or the original size may not appear. In this event, manually set the correct original
size.
SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE (page 5-46)
►
SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 5-47)
►
To specify the size that the machine can automatically detect:
Select the group of detected original sizes by selecting [System Settings] in "Setting mode (administrator)" → [Common
Settings] → [Device Control] → [Original Size Detector Setting].
Minimum original size
5-1/8" (height) x 5-1/2" (width)
(131 mm (height) x 140 mm (width))
-
5-13
Maximum original size
11-5/8" (height) x 39-3/8" (width)
(297 mm (height) x 1000 mm* (width))
11-5/8" (height) x 17" (width)
(297 mm (height) x 432 mm* (width))