BEFORE USING THE MACHINE►MAINTENANCE
REPLACING THE STAMP CARTRIDGE
If a stamp unit (AR-SU1) is installed on the automatic document feeder and the stamp has become light, replace the
stamp cartridge (AR-SV1).
Supplies
Stamp cartridge (2 in package) AR-SV1
When using the MX-3070N/MX-3570N/MX-4070N/MX-5070N/MX-6070N
1
2
3
4
5
Open the automatic document feeder.
Remove the document backplate sheet
from the automatic document feeder.
Remove the sheet slowly. Place the removed sheet with the
side that was attached face up on the document glass.
Grasp the tab on the stamp unit and
pull the unit out.
Remove the stamp cartridge (A).
(A)
Install a new stamp cartridge.
1-156