Sharp MX-3050N User Manual page 217

COPIER►BASIC PROCEDURE FOR MAKING COPIES
Copy by automatically calculating the repeat count (Auto Repeat)
Place the original.
1
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-78)
► DOCUMENT GLASS (page 1-80)
Tap the [Detail] key to change to normal mode.
2
► Changing mode from each mode (page 2-5)
Tap the [Others] key, and then tap the [Repeat Layout] key.
3
4 Tap the [Auto Repeat] key.
5
Others
Repeat Layout
Auto Layout of Repeat Face Based on Original, Paper Size and Ratio.
Off
Current Setting
Original
Auto Repeat
Paper Select
Fixed Repeat
Copy Ratio
Photo Repeat
Parting Line
Off
Back
Set so that there are one or more repeat faces.
6
Others
Repeat Layout
Auto Layout of Repeat Face Based on Original, Paper Size and Ratio.
Off
Current Setting
Original
Auto Repeat
Paper
Select
Fixed Repeat
Copy Ratio
Photo Repeat
Parting Line
Off
Back
• To cancel the Auto Repeat setting:
Tap the [Off] key.
• To cancel all settings:
Tap the [CA] key.
Original
Change Size/Direction.
Color Mode
Background Adjustment
Exposure
Select Type/Exposure
5½x8½R Repeat
Number
8½x11
100%
Preview CA
B/W Color
Start Start
4 11x17
Original
Change Size/Direction.
Color Mode
Background Adjustment
Exposure
Select Type/Exposure
5½x8½R
No. of
Faces
8½x11
100%
Preview CA
B/W Color
Start Start
2-55
Check the repeat faces which have
been calculated automatically.
Change the original size, paper size, or copy ratio by tapping
the respective [Original], [Paper Select], or [Copy Ratio] key
when necessary.
► SELECTING THE ORIENTATION AND SIZE OF THE
ORIGINAL (page 2-33)
► MANUAL RATIO SELECTION (page 2-27)
► SELECTING THE PAPER TRAY FOR COPYING (page
2-13)
Specify the repeat partition line.
After the settings are completed, tap
sequence.
and [Back] keys in