Embedded Application Settings; Polling Setting - Sharp MX-3050N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS

Embedded Application Settings

Store and manage "embedded applications" that are installed in the machine.
• [Add] key
Adds a new embedded application.
• List
Lists the currently installed embedded applications.
Install Embedded Application
When you tap the [Add] key, the registration screen appears. Up to 16 items can be installed.
• When installing from the operation panel of the machine, the files in the USB memory connected to the machine are
installed. When installing from the Web page, the files in the computer are installed.
• The maximum area of the hard disk that applications can use is 2 GB. If previously installed applications are already using
2 GB of area, a new application cannot be installed.
Store Embedded Application
By storing an already installed embedded application in "standard application", the application can be used. Select the
application name checkbox and tap the [Add Standard Applications] key.
Delete Embedded Application
Tap an application name in the list to display the information of that standard application.
After checking the information, delete the standard application with the [Delete] key.

Polling Setting

When linked to an external application, you can store and manage addresses in order to use a service that uses a
polling function.
Item
Server 1 - Server 2
Polling Address
Check Interval
Timeout
Set to enable each of the servers.
Enter the URL of the server or computer that the machine will poll.
Enter the check interval for the server. The default is 1 minute.
Set the timeout time. The default setting is 20 seconds.
7-118
Settings