Transmission By Redialing (Resend) - Sharp MX2300N User Manual

TRANSMISSION BY REDIALING (RESEND)

The destinations of the most recent 8 transmissions by fax, Scan to E-mail, and/or Internet fax are stored. One of these
can be selected to resend to that destination.
1
Ready to send.
Scan
Fax
Mode Switch
8 x11 1 / 2
Image
2
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
No.01
AAA AAA
3 No.02 BBB BBB
No.03 0312345678
No.04 xxx@xx.xxx.com
4
• If numeric keys were pressed during the previous transmission, the [Resend] key may not dial the correct number.
• Resending to destinations of a broadcast transmission or a transmission that used a program will not be possible if a
one-touch key in which multiple destinations are stored (group key) was used.
Resend
Speaker
Send
Address Book
Auto
Sub Address
Special Modes
Quick File
No.05 CCC CCC
No.06 DDD DDD
No.07 EEE EEE
FFF FFF
No.08
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Touch the [Resend] key.
File
Touch the key of the fax destination that
Cancel
you wish to redial.
The last eight transmission destinations appear.
Press the [BLACK & WHITE START] key
( ).
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning finishes, place the next original and press
the [BLACK & WHITE START] key (
pages have been scanned and then press the [Read-End]
key.
A beep will sound to indicate that scanning is finished.
25
). Repeat until all