Sharp MX-3050N User Manual page 513

FACSIMILE►PERFORMING F-CODE COMMUNICATION
Tap the [Others] key, and tap the [Memory Box] key.
3
4
Confidential
Folder Name
Public Box
Back
reception memory
Tap the folder of the F-code memory polling box.
5
Tap [Change Number of Times] on the action panel, and set the polling times.
6
To erase the original after its transmission, tap the [Once] key. To repeat transmitting an original, tap the [Unlimited] key.
Change the settings as necessary.
After the settings are completed, tap
Tap the [Start] key.
7
Scanning of the original starts.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
• When you place the original on the document glass, scan each page one at a time.
• When scanning finishes, place the next original and tap the [Start] key.
Repeat until all pages have been scanned and then tap the [Read-End] key.
You can tap the [Preview] key to check a preview of the image before sending a fax. For more information, see
"CHECKING THE IMAGE TO BE TRANSMITTED (page
in the preview screen.
Change Number of Times
Polling Memory
Times
Once
Start
8½x11 8½x11
100%
, and [Back] keys.
4-114
Tap the [Polling Memory] tab.
CA
4-28)". However, settings for this function cannot be changed