Disassembly Process; Scanner Unit Removal - Epson Stylus CX3100 Service Manual

EPSON Stylus CX3100/3200

4.2 Disassembly Process

The flowchart below shows Disassembly Process

"Scanner Unit Removal"

"Disassembly of Printer"
Figure 4-1. Flowchart (1)
Disassembly and Assembly
START
on page 38
on page 44
4.2.1 Scanner Unit Removal
1. Remove the one screw (CBP-Tite 3x10 F/Zn) securing the FFC Cover to the Middle
Housing.
NOTE: Screw tightening torque: 0.5 -0.7 Nm
CBP-Tite 3x10
Figure 4-2. Screw securing the Connector Cover
2. Remove the FFC Cover.
3. Disconnect the Harness Grounding Plate from the terminals on the Power Supply Unit.
Harness Grounding Plate
4. Release the harness of the Scanner from the Mini Clamp on the Power Supply Unit.
Disassembly Process
Figure 4-3. Harness Grounding Plate
Revision A
FFC Cover
Mini Clamp
38