Ink System Assy - Epson Stylus Photo RX700 Service Manual

EPSON Stylus Photo RX900

4.4.8 Ink System Assy

C A U T I O N
The print quality may be degraded if skin grease adheres to the
wiper. Do not touch the wiper with your bare hand.
C H E C K
For easy work, you are advised to move the carriage from the
P O I N T
home position before disassembling the Stylus Photo RX700.
(Move the carriage by turning power ON and then turning it OFF
timely.)
1. Remove the Printer Mechanism. (p.107)
2. Remove the screws (x2) securing the Ink System Assy at the right side of the printer.
3. Release the projections from the printer frame, and remove the Ink System Assy.
Before tightening the screw, check that the projections (x3) are
located as shown at right.
Confirm that the ground spring is located as shown at right.
(See Figure 4-48)
Disassembly and Assembly Disassembly and Assembly of Major Parts of Printer
Ink System Assy
Projection
Projection
C.B.S-Tite 3x6 F/ZN-3C
Torque: 0.8 ± 0.1N
Figure 4-47. Removing the Ink System Assy
Hook
Figure 4-48. Installing the Ink System Assy
Revision A
C.B.P-Tite 3x8 F/ZN-3C
⋅
Torque: 0.6 ± 0.1N m
⋅
m
Ground spring
112