Disassembly Of Printer; Middle Housing Removal - Epson Stylus CX3100 Service Manual

EPSON Stylus CX3100/3200

4.4 Disassembly of Printer

This section describes the disassembly procedure for the printer of Stylus CX3100/
3200. Figure 4-17 below shows the flowchart for disassembly procedure.
START

"Middle Housing Removal"

on page 44
"ASF Unit Removal"
on page 48
"Main Board Removal"
on page 54
"Power Unit Removal"
on page 56
Figure 4-17. Flowchart (3)
Disassembly and Assembly
"Print Head Removal"
on page 46
"Holder Shaft Unit Removal"
on page 52
"Front Frame Unit Removal"
on page 53
"CR Motor Removal"
on page 50
"Waste Ink Pad Removal"
on page 49
Disassembly of Printer
4.4.1 Middle Housing Removal
1. Remove the scanner unit. (Refer to
2. Remove the three screws (CBP-Tite 3x10 F/Ni) securing the Front Housing to the
Middle Housing.
NOTE: Screw tightening torque: 0.5-0.7 Nm
Front Housing
CBP-Tite 3x10
Figure 4-18. Screws securing the Front Housing
3. Remove the Front Housing.
4. Remove the four screws (CBP 3x10 F/Zn) securing the Middle Housing to the Porous
Pad Tray.
Revision A
"Scanner Unit Removal" on page 38)
44