Tools; Work Completion Check - Epson Stylus NX510 Service Manual

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510

4.1.2 Tools

Use only specified tools to avoid damaging the printer.
Table 4-1. Tools
Name
(+) Phillips screwdriver #1
(+) Phillips screwdriver #2
Flathead screwdriver
Flathead Precision screwdriver #1
Tweezers
Longnose pliers
Acetate tape
Nippers
Note * : All of the tools listed above are commercially available.
EPSON provides the tools listed with EPSON tool code.
DISASSEMBLY/ASSEMBLY

4.1.3 Work Completion Check

If any service is made to the printer, use the checklist shown below to confirm all
works are completed properly and the printer is ready to be returned to the user.
EPSON Tool Code*
1080530
---
---
---
---
---
1003963
---
Overview
Table 4-2. Work Completion Check
Classification Item
Self-test Is the operation normal?
ON-line Test Is the printing successful?
Printhead (Nozzle Is ink discharged normally from
check pattern print) all the nozzles?
Does it move smoothly?
Is there any abnormal noise
during its operation?
Carriage Mechanism
Is the CR Motor at the correct
temperature? (Not too hot to
touch?)
Printer Unit
Is paper advanced smoothly?
No paper jamming?
No paper skew?
No multiple feeding?
Paper Feeding
Mechanism
No abnormal noise?
Is the paper path free of any
obstructions?
Is the PF Motor at correct
temperature?
Revision A
Check Point Status
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
93
Confidential