Epson Stylus NX510 Service Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. Stylus NX510
  6. Service manual

Epson Stylus NX510 Service Manual

Color inkjet printer
Hide thumbs Also See for Stylus NX510:
Table of Contents

Advertisement

Quick Links

See also: Instructional Manual , Quick Manual

SERVICE MANUAL

Color Inkjet Printer
Epson Stylus NX510/NX515/SX510W/
Epson Stylus NX415/SX410/SX415/
Epson Stylus NX215/SX210/SX215/
SX515W/TX550W
TX410/TX419
TX210/TX213/TX219/
ME OFFICE 510
Confidential
SEMF09-002

Advertisement

Table of Contents
loading

Related Manuals for Epson Stylus NX510

Summary of Contents for Epson Stylus NX510

  • Page 1: Service Manual

    SERVICE MANUAL Color Inkjet Printer Epson Stylus NX510/NX515/SX510W/ SX515W/TX550W Epson Stylus NX415/SX410/SX415/ TX410/TX419 Epson Stylus NX215/SX210/SX215/ TX210/TX213/TX219/ ME OFFICE 510 Confidential SEMF09-002...
  • Page 2 The contents of this manual are subject to change without notice. All effort have been made to ensure the accuracy of the contents of this manual. However, should any errors be detected, SEIKO EPSON would greatly appreciate being informed of them.
  • Page 3 MAKE CERTAIN THAT THE SOURCE VOLTAGES IS THE SAME AS THE RATED VOLTAGE, LISTED ON THE SERIAL NUMBER/RATING PLATE. IF THE EPSON PRODUCT HAS A PRIMARY AC RATING DIFFERENT FROM AVAILABLE POWER SOURCE, DO NOT CONNECT IT TO THE POWER SOURCE.

  • Page 4: About This Manual

    Provides Epson-approved methods for adjustment. CHAPTER 6.MAINTENANCE Provides preventive maintenance procedures and the lists of Epson- May indicate an operating or maintenance procedure, practice or C H E C K approved lubricants and adhesives required for servicing the product.
  • Page 5 Revision Status Revision Date of Issue Description May 7, 2009 First Release Confidential...

  • Page 6: Table Of Contents

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Contents Chapter 1 PRODUCT DESCRIPTION Chapter 2 OPERATING PRINCIPLES 1.1 Features........................9 2.1 Overview ......................49 2.1.1 Printer Mechanism..................49 1.2 Printing Specifications..................10 2.1.2 Motors & Sensors ..................50 1.2.1 Basic Specifications..................10 2.1.3 Printhead.....................
  • Page 7 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.3.4 Scanner Unit/Hinge .................. 100 4.8.3 Printhead (SX210 series) ................158 4.3.5 Upper Housing/Card Slot Cover............... 103 4.8.4 Removing the Printer Mechanism (Lower Housing) (SX210 series)..160 4.4 Removing the Circuit Boards ................105 4.4.1 Main Board Unit ..................

  • Page 8: Product Description

    C H A P T E R PRODUCT DESCRIPTION Confidential...

  • Page 9: Chapter 1 Product Description

    (p.20). • Newly developed pigment ink is employed. *3 : For the details of the network interfaces, see “ 1.5.2 Network Interface (NX510 series • Borderless printing on specified EPSON brand paper is available. only) ” (p.24). Scanner *4 : Supports both wired network and wireless network.

  • Page 10: Printing Specifications

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.2 Printing Specifications Dimensions Table 1-2. Dimensions NX510 series SX410 series SX210 series 1.2.1 Basic Specifications Dimensions 450 mm (W) x 342 mm (D) x 182 mm (H) Table 1-3. Printer Specifications Weight 6.1 kg...

  • Page 11: Ink Cartridge

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.2.2 Ink Cartridge Shelf life Two years from production date (if unopened), six months after opening package. Specifications for the ink cartridges for each series are explained below. Storage Temperature Table 1-4. Cartridge types for NX510 series Table 1-7.

  • Page 12: Print Mode

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.2.3 Print Mode Table 1-8. Print Mode for NX510 series (Color) Resolution Dot Size Micro Border- NX510 series Media Print Mode Bi-d (cps) Weave less (H x V dpi) Table 1-8. Print Mode for NX510 series (Color)
  • Page 13 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 1-9. Print Mode for NX510 series (Monochrome) Table 1-9. Print Mode for NX510 series (Monochrome) Resolution Dot Size Micro Border- Resolution Dot Size Micro Border- Media Print Mode Bi-d Media Print Mode...
  • Page 14 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A SX410 series Table 1-10. Print Mode for SX410 series (Color) Resolution Dot Size Micro Border- Table 1-10. Print Mode for SX410 series (Color) Media Print Mode Bi-d (cps) Weave less (H x V dpi)
  • Page 15 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 1-11. Print Mode for SX410 series (Monochrome) Table 1-11. Print Mode for SX410 series (Monochrome) Resolution Dot Size Micro Border- Resolution Dot Size Micro Border- Media Print Mode Bi-d Media Print Mode...
  • Page 16 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A SX210 series Table 1-12. Print Mode for SX210 series (Color) Resolution Dot Size Micro Border- Table 1-12. Print Mode for SX210 series (Color) Media Print Mode Bi-d (cps) Weave less (H x V dpi)
  • Page 17 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 1-13. Print Mode for SX210 series (Monochrome) Table 1-13. Print Mode for SX210 series (Monochrome) Resolution Dot Size Micro Border- Resolution Dot Size Micro Border- Media Print Mode Bi-d Media Print Mode...

  • Page 18: Supported Paper

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.2.4 Supported Paper The table below lists the paper type and sizes supported by the printer. The supported paper type and sizes vary depending on destinations (between EAI, EUR, and Asia). Table 1-14. Supported Paper...
  • Page 19 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 1-14. Supported Paper Asia Thickness Paper Name Paper Size Weight (mm) Letter 215.9 x 279.4 mm (8.5”x11”) 210 x 297 mm (8.3”x11.7”) Photo Paper Glossy (EAI) 258 g/m 0.25 Glossy Photo Paper (Euro, Asia) (68 lb.)

  • Page 20: Printing Area

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.2.5 Printing Area 1.3 Scanner Specifications The printing area for this printer is shown below. Table 1-16. Basic Specifications Table 1-15. Printing Area (Margins) Item Specification Margin Scanner type Flatbed, color Print Mode...

  • Page 21: Scanning Range

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.3.1 Scanning Range 1.4 General Specifications Table 1-17. Scanning Range 1.4.1 Electrical Specifications OLM (left margin) OTM (top margin) (read length) (read width) 216 mm 297 mm 1.5 mm 1.5 mm Table 1-18. Primary Power Specifications...

  • Page 22: Environmental Conditions

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.4.2 Environmental Conditions 1.4.3 Durability Table 1-19. Environmental Conditions Table 1-20. Durability *1,2 Condition Temperature Humidity Shock Vibration Model Total print life Printhead Scanner carriage 10 to 35°C 0.15G, Black 20,000 pages Operating...

  • Page 23: Safety Approvals (Safety Standards/Emi)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.4.5 Safety Approvals (Safety standards/EMI) 1.5 Interface UL60950-1 This printer has USB interface and memory card slots of the following specifications. FCC Part15 Subpart B Class B 1.5.1 USB Interface Canada CSA No.60950-1 CAN/CSA-CEI/IEC CISPR 22 Class B The mounted USB Interfaces differ between NX510/SX410/SX210 series.

  • Page 24: Network Interface (Nx510 Series Only)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.5.2 Network Interface (NX510 series only) Table 1-22. Device ID When IEEE 1284.4 is Enabled When IEEE 1284.4 is Disabled NX510 series can be connected to the network via Wired or Wireless LAN connection.
  • Page 25 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Wireless LAN Switching Wired/Wireless LAN The following interface is equipped for the Wireless LAN connection. This printer can be connect to the network via either Wired LAN or Wireless LAN connection only. Table 1-26. Wireless LAN Enabling/disabling the Wireless LAN can be made from the Control Panel.

  • Page 26: Memory Card Slots

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.5.3 Memory Card Slots If you insert a Memory Stick DUO to the Memory Card Slot C A U T I O N without using the adapter, make sure to turn off the printer first, then remove the card using tweezers.

  • Page 27: Control Panel

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.6 Control Panel 1.6.1 Operation Buttons & LEDs NX510 series Table 1-30. NX510 series Buttons & LEDs Button/LED Function Power Turns the power ON/OFF. Start Starts printing. • Stops operation and displays the menu screen.
  • Page 28 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A SX410 series Table 1-31. SX410 series Buttons & LEDs Button/LED Function Power Turns the power ON/OFF. Start Starts printing. • Stops operation and displays the menu screen. • Stops printing and ejects paper.
  • Page 29 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A SX210 series Table 1-32. SX210 series Buttons & LEDs Button/LED Function Power Turns the power ON/OFF. Start Starts printing. Power LED Power button • Stops operation and displays the menu screen. • Stops printing and ejects paper.

  • Page 30: Control Panel Functions In Each Mode

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.6.2 Control Panel Functions in Each Mode This product provides the guidance for button operations for each mode on the LCD; therefore, the details of the control panel operations are omitted here. This section describes print setting items in each mode, and the timing of saving and initialization.
  • Page 31 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 1-33. Timing of Saving or Initializing Control Panel Settings (NX510 series) Mode Print Setting Default Value Saving Timing Initializing Timing Camera Direct Paper type Prem. Glossy When the settings are made in the PictBridge Setup When the Stop/Clear button is pressed while of the Setup menu.
  • Page 32 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.6.2.2 Control Panel Functions for SX410 series Table 1-34. Timing of Saving or Initializing Control Panel Settings (SX410 series) Mode Print Setting Default Value Saving Timing Initializing Timing Copy Number of copies When the Start button is pressed...
  • Page 33 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.6.2.3 Control Panel Functions for SX210 series Table 1-35. Timing of Saving or Initializing Control Panel Settings (SX210 series) Mode Print Setting Default Value Saving Timing Initializing Timing Copy Number of copies When the Start button is pressed...

  • Page 34: Specification For Each Function

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.7 Specification for Each Function 1.7.1.2 Stand-alone Copy Menu The following are the menu (settable items) for stand-alone copy. 1.7.1 Stand-alone Copy Function Table 1-38. Copy Menus for NX510/SX410 series 1.7.1.1 Supported Paper and Copy Mode...
  • Page 35 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.7.1.3 Relation Between Original and Copy 1.7.1.4 Copy Speed The scanning start position is located on the front right of the scan bed. The relations Table 1-40. Copy Speed between the original placed face down and its copy are as follows.

  • Page 36: Scan Function (Nx510/Sx210 Series Only)

    Revision A 1.7.2 Scan Function (NX510/SX210 series only) 1.7.3 Memory Card Direct Print Function The following shows the scan menu. When each menu is selected, Epson Scan installed 1.7.3.1 Supported Paper and Print Mode in PC runs each function. Table 1-41. NX510/SX410 series Supported Paper Type & Print Mode...

  • Page 37: Supported File Type And Media Type

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.7.3.2 Supported File Type and Media Type 1.7.3.4 Specifications for Handling Image Data The followings describe the file system, media format, and file type supported by the Table 1-44. Specifications for Handling Image Data memory card direct function.
  • Page 38 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 1-44. Specifications for Handling Image Data Table 1-44. Specifications for Handling Image Data Item Specification Remarks Item Specification Remarks Maximum 99 copies for each image. Date and time number of copies Up to 999 sheets in total.

  • Page 39: Memory Card Direct Print Menu

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.7.3.5 Memory Card Direct Print Menu 1.7.3.6 Makes Prints from Index Sheet Function Print settings The following describes the menu (settable items) in Memory Card Mode for NX510/ Table 1-46. Print Settings SX410 series. For SX210 series, only the Print Index Sheet function is available.

  • Page 40: Print Layout

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.7.3.7 Print Layout Table 1-47. Rules on Reading Markings The memory card direct print function supports two print layouts for printing images; Item Mark Description Remarks Borderless, and With Border. The Borderless layout is not allowed for some type of Layout (2pcs.)
  • Page 41 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Rules on Numbering and Rotating Images Trimming Off The numbers shown in the figure below indicate the photo frame numbers used for • When an image is aligned vertically with the photo frame.

  • Page 42: Camera Direct Print Function (Pictbridge) (Nx510/Sx410 Series Only)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.7.4 Camera Direct Print Function (PictBridge) 1.7.4.3 General Operation Procedure (NX510/SX410 series only) Before connecting the DSC, check that the printer is in the C H E C K Printing operations (selecting images to be printed, making print settings, starting/ P O I N T following status.

  • Page 43: Reprint/Restore Photos Function (Nx510 Series Only)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.7.5 Reprint/Restore Photos Function 1.7.4.4 Operating Specifications during Connecting DSC (NX510 series only) Table 1-50. Operations during Connecting DSC NX510 series offers the photo copy function. This function allows the user to copy...

  • Page 44: Setup Mode

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 1.7.6 Setup Mode 1.7.5.3 How to Place Silver Halide Pictures The following explains how to place silver halide film-based pictures on the document NX510/SX410 series turns into the Setup mode by pressing the [Setup] button, and glass of the printer.
  • Page 45 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 1-53. NX510/SX410 series Common Setup Mode Menu Item Function • Language Sets the language. • Display Format Display format can be selected from the following three Maintenance types. 1-up with Info 1-up without Info...
  • Page 46 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 1-54. Setup Mode Menu available only for NX510 series Item Function Changes settings for Network. • Confirmation of Network Settings Displays the current settings. Status Sheet can be printed. (Refer to Figure 1-15.)
  • Page 47 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 1-55. Setup Mode Menu for SX210 series Item Function A nozzle check pattern to check the Printhead nozzles status is Nozzle Check printed. A head cleaning can be run if necessary. (Refer to Figure 1-16.)

  • Page 48: Operating Principles

    C H A P T E R OPERATING PRINCIPLES Confidential...

  • Page 49: Overview

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 2.1 Overview PF Encoder Sensor PF Scale In this chapter, the product names are called as follows: C H E C K P O I N T Notation Product name NX510 series Epson Stylus NX510/NX515/SX510W/SX515W/TX550W...

  • Page 50: Motors & Sensors

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 2.1.2 Motors & Sensors CR Contact Module PF Motor The printer mechanism of this product is equipped with the following printheads, Cover Open Sensor motors and sensors. (NX510 series only) CR Encoder Sensor Table 2-1.
  • Page 51 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 2-2. Scanner Mechanism CIS & Motor Name Specification Resolution: 20,400 pixel CIS Unit NX510 series Black: 16 bit per pixel (input), 1 bit/ 8 bit per pixel (output) CR Motor Color: 48 bit per pixel (input), 24 bit per pixel (output)

  • Page 52: Printhead

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 2.1.3 Printhead Each model of this product employs a different type of printhead. The printhead configurations are as follows. Table 2-3. Printheads of this product Item NX510 series SX410 series SX210 series Type...

  • Page 53: Power-On Sequence

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 2.2 Power-On Sequence Table 2-4. Condition 1: Normal power-on sequence Carriage/PF roller Operation movement and position This section describes the power-on sequences in two conditions. The sequences for these three series are basically similar with the exception of the CR lock setting 2-4.The carriage moves to the 0-digit side slowly and confirms it...
  • Page 54 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 2-4. Condition 1: Normal power-on sequence Table 2-4. Condition 1: Normal power-on sequence Carriage/PF roller Carriage/PF roller Operation Operation movement and position movement and position 5. Checking for remaining paper on the paper path and 8-4.The carriage slowly returns to its home position.

  • Page 55: Printer Initialization

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 2.3 Printer Initialization Table 2-5. Condition 2: Power-on sequence after recovering from a paper jam error Carriage/PF Roller Operation There are four kinds of initialization method, and the following explains each movement and position initialization Executes No.1 to No.5 on the normal power-on sequence...

  • Page 56: Chapter 3 Troubleshooting

    C H A P T E R TROUBLESHOOTING Confidential...

  • Page 57: Overview

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 3.1 Overview 3.1.1 Specified Tools This printer does not require any specified tools for troubleshooting. This chapter describes how to solve problems. 3.1.2 Preliminary Checks To avoid electric shocks, be careful when checking the electrical W A R N I N G circuit boards below while the power is on.

  • Page 58: Troubleshooting

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 3.2 Troubleshooting Sensors NX510 series 3.2.1 Motor and Sensor Troubleshooting Table 3-3. Sensor check point (NX510 series) Sensor name Check point Signal level Switch mode Motors Less than 0.4V Off: No paper The resistance values for the CR motor and the PF motor are given below, however, the...

  • Page 59: Error Indications And Fault Occurrence Causes

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 3.3 Error Indications and Fault Occurrence Causes This section explains error/warning messages indicated when an error occurs at each sequence/operation(power-on, paper loading/feeding, ink suction, etc.) and their error causes. 3.3.1 Error Message List Table 3-5.
  • Page 60 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-5. Error Indications and Fault Occurrence Causes LCD Message Error Name STM3 Message Error Cause Reference NX510 series SX410 series SX210 series Reload the paper, then press the Start button on Table 3-10.
  • Page 61 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-5. Error Indications and Fault Occurrence Causes LCD Message Error Name STM3 Message Error Cause Reference NX510 series SX410 series SX210 series Black: XXXX Color: XXXX Table 3-11. Head cleaning Replace ink before Head cleaning was attempted in Replace ink cartridge before cleaning Printhead.

  • Page 62: Troubleshooting By Error Message

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 3.3.2 Troubleshooting by Error Message The following tables provide troubleshooting procedures. Confirm the error message indicated on the LCD or the STM3 screen on the PC’s display, and verify it in the following list and the figures at the end of this chapter for the corresponding troubleshooting remedy.
  • Page 63 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-6. Check point for Fatal error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if the Scanner Carriage FFC is connected to the 1.
  • Page 64 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-6. Check point for Fatal error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if the CR Motor Connector Cable is connected to 1.
  • Page 65 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-6. Check point for Fatal error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if the PF Motor Connector Cable is connected to 1.
  • Page 66 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-6. Check point for Fatal error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if the CR Scale does not come off or it properly 1.
  • Page 67 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-6. Check point for Fatal error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if the PF Scale is not damaged or contaminated.
  • Page 68 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-7. Check point for the Maintenance request according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Change the Waste Ink Pads and initialize the •...
  • Page 69 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-8. Check point for Paper jam error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if the Star Wheel Holder Assy is correctly 1.
  • Page 70 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-8. Check point for Paper jam error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if the Upper Paper Guide Unit is correctly 1.
  • Page 71 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-9. Check point for CSIC error / Incorrect Ink Cartridge according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if Ink Cartridge is properly installed.
  • Page 72 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-10. Check point for Paper out error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if any paper dust is not adhered to the surface of 1.
  • Page 73 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-10. Check point for Paper out error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if the Extension Spring 0.143 does not come off in 1.
  • Page 74 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-10. Check point for Paper out error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position The LD Roller is not set to the ASF home 1.
  • Page 75 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-14. Check point for Index Sheet 1 error (No index Sheet) according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position Document Cover 1. Check if the Document Cover is open.
  • Page 76 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-17. Check point for Pre-scanning error (photo) according to each phenomenon (NX510/SX410 series only) Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position • Operation No photos cannot be recognized and an 1.
  • Page 77 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-19. Check point for Communication error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if the Panel FFC is connected to CN1 on the Panel 1.
  • Page 78 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-19. Check point for Communication error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if the PS Board Connector Cable is connected to 1.
  • Page 79 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-19. Check point for Communication error according to each phenomenon Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Check if the USB Cable is connected between the printer 1.
  • Page 80 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-20. Check point for Scanner unit open error according to each phenomenon (NX510 series only) Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position 1. Is the Cover Open Sensor cable properly connected to 1.

  • Page 81: Superficial Phenomenon-Based Troubleshooting

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 3.3.3 Superficial Phenomenon-Based Troubleshooting This section explains the fault locations of the error states (print quality and abnormal noise) other than the error states (LED and STM3) in the previous section. Table 3-21. Check point for the error that multiple sheets of paper are always loaded without LEDs and STM3...
  • Page 82 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-22. Check point for the abnormal noise Occurrence Defective timing Detailed phenomenon Check point Remedy unit/part name CR position The abnormal noise occurs at the first 1. Check if the grease on the Carriage Path is sufficient.
  • Page 83 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-24. Check point for the defective printing quality Defective Print Quality State Detailed phenomenon Check point Remedy unit/part name 1. Check if there is not any foreign material/damage around 1. Remove the foreign material around the seal the seal rubber part on the Cap Unit.
  • Page 84 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-24. Check point for the defective printing quality Defective Print Quality State Detailed phenomenon Check point Remedy unit/part name 1. Check if the Head FFC is connected to the connector on 1. Connect the Head FFC to the Printhead and the the Main Board Unit shown below.
  • Page 85 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-24. Check point for the defective printing quality Defective Print Quality State Detailed phenomenon Check point Remedy unit/part name 1. For printing in the Bi-D mode, check if Bi-D Adjustment 1. Perform Bi-D Adjustment to correct print start Adjustment has been performed properly.
  • Page 86 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-24. Check point for the defective printing quality Defective Print Quality State Detailed phenomenon Check point Remedy unit/part name Printer driver & 1. Check if the suitable paper is used according to the printer 1.
  • Page 87 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-24. Check point for the defective printing quality Defective Print Quality State Detailed phenomenon Check point Remedy unit/part name 1. Check if any paper dust is not adhered to the surface of 1.
  • Page 88 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 3-24. Check point for the defective printing quality Defective Print Quality State Detailed phenomenon Check point Remedy unit/part name 1. Check if the Printhead Cover does not have the ink drop. 1. Clean the Printhead Cover carefully with a soft Printhead cloth.

  • Page 89: Network Troubleshooting (Nx510 Series Only)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 3.4 Network Troubleshooting (NX510 series only) Troubles in installing a software Table 3-26. Troubles in Installing a Software The following table describes the troubleshooting related to the Network function of Symptom Check Point Remedy the NX510 series.
  • Page 90 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Troubles during printing and scanning from PC Table 3-27. Troubles during printing and scanning from PC Symptom Check Point Remedy Print cannot be made 1. In Wireless LAN’s case, check if Correctly connect the...

  • Page 91: Chapter 4 Disassembly/Assembly

    C H A P T E R DISASSEMBLY/ASSEMBLY Confidential...

  • Page 92: Overview

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.1 Overview Disconnect the power cable before disassembling or W A R N I N G assembling the printer. In this chapter, the product names are called as follows: C H E C K...

  • Page 93: Tools

    Is the CR Motor at the correct Note * : All of the tools listed above are commercially available. temperature? (Not too hot to OK / EPSON provides the tools listed with EPSON tool code. touch?) Printer Unit Is paper advanced smoothly?
  • Page 94 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 4-2. Work Completion Check Classification Item Check Point Status Is glass surface dirty? OK / Mechanism Is any foreign substance mixed OK / in the CR movement area? Does CR operate smoothly?

  • Page 95: Procedural Differences Between The Models

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.1.4 Procedural Differences between the Models This chapter describes the disassembling/reassembling procedures based on NX510 series. As for some parts/components; however, the procedures differ between each model. Refer to the following table to confirm the differences and the reference.
  • Page 96 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 4-3. Differences between Models Item Difference NX510 series SX410 series SX210 series Reference* Existence of Ferrite core Number of pieces of acetate Front Frame tape that secure the Head FFC One piece...

  • Page 97: Disassembly Procedures

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.2 Disassembly Procedures For disassembling each unit, refer to the pages in the following flowchart. Start “ 4.3.3 Document Cover/ASF Cover ” (p99) “ 4.3.1 Paper Support Assy ” (p98) “ 4.3.2 Stacker Assy ” (p98) “...

  • Page 98: Removing The Housing

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.3 Removing the Housing 4.3.2 Stacker Assy Parts/Components need to be removed in advance: None 4.3.1 Paper Support Assy Removal procedure Parts/Components need to be removed in advance: None Open the Stacker Assy.

  • Page 99: Document Cover/Asf Cover

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.3.3 Document Cover/ASF Cover ASF Cover Release the both guide pins of the ASF Cover from the holes of the Scanner Parts/Components need to be removed in advance: None Unit, and remove the ASF Cover.

  • Page 100: Scanner Unit/Hinge

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.3.4 Scanner Unit/Hinge Be careful of the sharp edges shown in Figure 4-8 when C A U T I O N assembling or reassembling. Parts/Components need to be removed in advance Document Cover/ASF Cover...
  • Page 101 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Peel off the double-sided tape (x1) that secures the Scanner Carriage FFC to Remove the screws (x2) that secure the Scanner Unit. the Main Board Frame. Open the Scanner Unit. (For SX410 series, remove the Scanner Carriage FFC with the core.)
  • Page 102 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Remove the screw (x1) that secures the Hinge, and remove the Hinge. Make sure to follow the instructions below because the shape of the USB Cover for NX510 series and SX410/SX210 series Left Side differs.

  • Page 103: Upper Housing/Card Slot Cover

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.3.5 Upper Housing/Card Slot Cover Card Slot Cover Remove the screw (x1) that secures the Card Slot Cover. Parts/Components need to be removed in advance Release the hook (x1) of the Card Slot Cover and remove the Card Slot Cover.
  • Page 104 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Tighten the screws in the order given in Figure 4-13. The Ink Position Label is not included in the Upper Housing as an ASP. When replacing the Upper Housing, attach the label following the instructions below.

  • Page 105: Removing The Circuit Boards

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.4 Removing the Circuit Boards Remove the screw (x1) that secures the Panel Grounding Plate, and remove the Panel Grounding Plate from the Main Board Unit. Remove the screws (x2) that secure the Main Board Unit, and remove the 4.4.1 Main Board Unit...
  • Page 106 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Disassembling the Main Board Unit When installing the Main Board Unit, insert its hooks (x2) Remove the Main Board Unit. (p105) into the cutouts (x2) of the Left Frame. Remove the screws (x2) that secure the Wireless LAN Board.
  • Page 107 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Remove the screws (x6) and remove the Upper Shield Plate. Remove the screw (x2) that secures the Main Board, and remove the Main Board. Backside Main Board MB Lower Shield Plate C.B.S. 3x6, F/Zn-3C (4±0.5kgfcm) C.P.

  • Page 108: Chapter 5 Adjustment

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.4.2 Panel Unit/LCD Unit NX510 series only: A D J U S T M E N T R E Q U I R E D When replacing the Main Board, the MAC address need to be...
  • Page 109 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Remove the screws (x3) that secure the Panel Board and Panel Board Frame, Be sure to disconnect the Panel FFC from the connector on the C H E C K and remove the Panel Board together with the Panel Board Frame.
  • Page 110 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Remove each switch button from the Panel Cover. When installing the Panel Board, align the positioning holes of the Panel Board with their positioning pins of the Panel Button Button Housing as shown in Figure 4-28.

  • Page 111: Power Supply Unit

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.4.3 Power Supply Unit Remove the screws (x2) that secure the Power Supply Unit. Lift the Base Frame a little, and remove the Power Supply Unit. Parts/Components need to be removed in advance...
  • Page 112 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Tighten the screws in the order given in Figure 4-32. Secure the Power Unit Cable with the hook of the Base Frame as shown in the figure below. Following the standard below, store the Power Unit Cable in the hole on the Base Frame.

  • Page 113: Disassembling The Printer Mechanism

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5 Disassembling the Printer Mechanism Cut the Cartridge Cover Hinge with a nipper, and remove the upper half of it and Hinge Cover Cartridge. 4.5.1 Printhead Release the hooks of the lower half of the Cartridge Cover Hinge with tweezers, and remove the lower half of it.
  • Page 114 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Disconnect the Head FFC (x1) that is connected to the CSIC Board. Do not touch or damage the nozzles or the ink supply needles of the C A U T I O N Release the tabs (x2) securing the Holder Board Assy with a flathead Printhead.

  • Page 115: Cr Scale

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.2 CR Scale Tighten the screws in the order given in Figure 4-41. Insert the Holder Board Assy vertically into the CR Unit so as Parts/Components need to be removed in advance not to put the Holder Board Assy on the rib of the Printhead.

  • Page 116: Hopper

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.3 Hopper Release the Extension Spring 1.41 from the hook of the Main Frame. Rotate the CR Scale 90 degrees as shown in the figure and remove the scale Parts/Components need to be removed in advance from the Main Frame.

  • Page 117: Removing The Printer Mechanism (Lower Housing)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.4 Removing the Printer Mechanism (Lower Housing) When installing the Hopper, be sure to engage the rib of the Hopper with the guide groove of the Base Frame. See the following because the disassembling/reassembling...
  • Page 118 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Release the hook that secures the Rear Cover and remove the Rear Cover. Remove the screws (x5) that secure the Printer Mechanism, and remove the Printer Mechanism. Hook Rear Cover Figure 4-48. Removing the Printer Mechanism (2)

  • Page 119: Left Frame

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.5 Left Frame When installing the Left Frame, lead the PF Encoder FFC through the hole of the Left Frame. Parts/Components need to be removed in advance Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot...

  • Page 120: Front Frame/Right Frame

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.6 Front Frame/Right Frame For NX510/SX410 series: Peel off the Porous Pad Frame Right from the Right Frame and the Base Frame. Parts/Components need to be removed in advance Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot...
  • Page 121 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Release the hook (x1), and remove the Front Frame. When installing the Front Frame, pay attention to the following instructions. • As shown in Figure 4-56, be sure to secure the Front Frame with the hook (x1) and the cutouts (x2).

  • Page 122: Star Wheel Holder Assy

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.7 Star Wheel Holder Assy 4.5.8 EJ Roller Parts/Components need to be removed in advance Parts/Components need to be removed in advance Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing...

  • Page 123: Pf Encoder Sensor

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.9 PF Encoder Sensor When installing the EJ Roller, pay attention to the following instructions. Parts/Components need to be removed in advance • Make sure that the rubber part of the EJ Roller does not Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot contact with the hook of the Front Paper Guide.

  • Page 124: Pf Scale

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.10 PF Scale NX510/SX210 series only: When installing the PF Encoder Sensor, be sure to attach the Parts/Components need to be removed in advance acetate tape (x1) referring to the figure below. Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot...

  • Page 125: Pf Motor

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.11 PF Motor For SX410/SX210 series : Remove the Grounding Spring from the PF Motor. Remove the screws (x3) that secure the PF Motor, and remove it. Parts/Components need to be removed in advance...
  • Page 126 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Whenever the PF Motor is removed/replaced, the required SX410/SX210 series only: A D J U S T M E N T R E Q U I R E D adjustments must be carried out.

  • Page 127: Cr Motor

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.12 CR Motor After releasing the Timing Belt, temporarily secure the belt to the C A U T I O N Cartridge Cover with a tape or the like so as not to allow the grease Parts/Components need to be removed in advance to come in contact with the Timing Belt.

  • Page 128: Main Frame Assy

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.13 Main Frame Assy Be sure to install the CR Motor so that the groove on it faces downward. Parts/Components need to be removed in advance Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot...
  • Page 129 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Move the CR Unit to the left side of the printer. When laying the Main Frame Assy, make sure to put it as shown in C A U T I O N Remove the screw (x1) that secures the LD Shaft Holder.
  • Page 130 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A When installing the Main Frame Assy, pay attention to the Tighten the screws in the order given in Figure 4-79. following instructions. Follow the steps below to install the Extension Spring 10.99 to Put the right part of the Upper Paper Guide under the the Upper Paper Guide.

  • Page 131: Cr Unit

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.14 CR Unit Release the Timing Belt from the groove of the CR Unit. Parts/Components need to be removed in advance CR Unit Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot Cover/Lower Housing/Main Board Unit/Left Frame/Front Frame/Right Frame/CR...

  • Page 132: Upper Paper Guide

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.15 Upper Paper Guide 4.5.16 ASF Unit Parts/Components need to be removed in advance Parts/Components need to be removed in advance Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot...
  • Page 133 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Remove the screws (x2) that secure the ASF Unit. When installing the ASF Unit, be sure to align the guide pins (x2) of the Base Frame with the positioning holes (x2) of the...

  • Page 134: Ink System Unit

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.17 Ink System Unit For NX510 series: Detach the Waste Ink Tubes (x2) together with the Tube Stopper from the Parts/Components need to be removed in advance Waste Ink Cover. For SX410/SX210 series:...
  • Page 135 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A If the Carriage lock lever comes off, reassemble it following When installing the Ink System Unit, pay attention to the the steps below. following instructions. Attach the one end of the Extension Spring 0.8 to the •...
  • Page 136 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A For SX410/SX210 series: For NX510 series: Place the tube with a red line to the rear as shown below, and Route the Waste Ink Tube through the groove of the Base • •...

  • Page 137: Front Paper Guide

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.18 Front Paper Guide Release the hook (x1) of the Front Paper Guide, and remove the Front Paper Guide. Parts/Components need to be removed in advance Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot...

  • Page 138: Pf Roller

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.19 PF Roller Whenever the Front Paper Guide, is removed/replaced, the A D J U S T M E N T required adjustments must be carried out. R E Q U I R E D Parts/Components need to be removed in advance Chapter 5 “...

  • Page 139: Waste Ink Pads

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.5.20 Waste Ink Pads Release the PF Roller from the cutout of the Base Frame (Step 2-1), and remove the PF Roller (Step 2-2) Parts/Components need to be removed in advance Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot...
  • Page 140 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Remove the Waste Ink Cover and the Diffusion Sheet. SX410 series Waste Ink Cover Dowel and Positioning Hole Diffusion Sheet Figure 4-110. Removing the Waste Ink Cover and Diffusion Sheet When installing the Waste Ink Cover, be sure to align the dowel (x1) of the Base Frame with the positioning hole (x1) of Figure 4-112.

  • Page 141: Disassembling The Scanner Unit

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.6 Disassembling the Scanner Unit Remove the screws (x6) that secure the Upper Scanner Housing, and release the hooks (x2) inside the Lower Scanner Housing, then remove the Upper Scanner Housing by lifting the front of it.

  • Page 142: Scanner Carriage Unit

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.6.2 Scanner Carriage Unit Front Scanner Housing Remove the Upper Scanner Housing toward you. (p141) Parts/Components need to be removed in advance Release the hooks at the bottom of the Upper Scanner Housing, and remove Document Cover/ASF Cover/Scanner Unit/Upper Scanner Housing the Front Scanner Housing.
  • Page 143 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Release the tabs (x2) from the hooks (x2) on the Scanner CR Holder and Take extra care not to contaminate the Scanner Timing Belt with C A U T I O N remove the CIS Unit.

  • Page 144: Scanner Motor Unit

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.6.3 Scanner Motor Unit Remove the Belt Clamp that secures the Timing Belt. Remove the Scanner Timing Belt together with the Torsion Spring from the Parts/Components need to be removed in advance Scanner CR Holder.
  • Page 145 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A When installing the Scanner Motor Unit, align the positioning holes (x2) of the Scanner Motor Unit with their positioning tabs (x2) of the Lower Scanner Housing as shown in Figure 4-125. When routing the Scanner Motor cable, place the ferrite core...

  • Page 146: Differences In Disassembling/Reassembling Sx410 Series

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.7 Differences in Disassembling/Reassembling Disconnect the following connectors (x4) and FFCs (x5) from the Main Board. SX410 series Cable Cable CN No. CN No. 4.7.1 Main Board Unit (SX410 series) Power Supply Unit cable...
  • Page 147 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Remove the screw (x1) that secures the Main Board Unit, and remove the Disassembling the Main Board Unit Main Board Unit. Remove the Main Board Unit. (p146) Peel off the acetate tape. Remove the screws (x5) and remove the MB Lower Shield Plate.

  • Page 148: Panel Unit/Lcd Unit (Sx410 Series)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.7.2 Panel Unit/LCD Unit (SX410 series) Remove the screw (x1) that secures the Main Board, and remove the Main Board. See the following because the disassembling/reassembling C H E C K procedures of the Panel Unit/LCD Unit for NX510/SX210 series...
  • Page 149 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Remove the screws (x3) that secure the Panel Board and Panel Board Frame, Be sure to disconnect the Panel FFC from the connector on the C H E C K and remove the Panel Board together with the Panel Board Frame.

  • Page 150: Printhead (Sx410 Series)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.7.3 Printhead (SX410 series) Remove each switch button from the Panel Cover. See the following because the disassembling/reassembling Mode SW button Start SW button Power SW button C H E C K procedures of the Printhead for NX510/SX210 series differ from P O I N T those of SX410 series.
  • Page 151 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Do not touch or damage the nozzles or the ink supply needles of the Tighten the screws in the order given in Figure 4-138. C A U T I O N Printhead. Insert the Holder Board Assy vertically into the CR Unit so as not to put the Holder Board Assy on the rib of the Printhead.

  • Page 152: Removing The Printer Mechanism (Lower Housing) (Sx410 Series)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.7.4 Removing the Printer Mechanism (Lower Housing) When lifting the Printer Mechanism, be sure to hold the positions C A U T I O N (SX410 series) specified in the figure below to prevent the Main Frame from being deformed.
  • Page 153 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Before installing the Printer Mechanism, hang the Interface Connector Cable on the Lower Housing so as not to damage the cable with the Printer Mechanism. Interface Connector Cable Figure 4-142. Routing the Interface Connector Cable...

  • Page 154: Differences In Disassembling/Reassembling Sx210 Series

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.8 Differences in Disassembling/Reassembling Remove the screw (x1) that secures the Main Board Unit, and remove the Main Board Unit. SX210 series 4.8.1 Main Board Unit (SX210 series) Main Board Unit See the following because the disassembling/reassembling...

  • Page 155: Panel Unit/Lcd Unit (Sx210 Series)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.8.2 Panel Unit/LCD Unit (SX210 series) Disassembling the Main Board Unit For the disassembling/reassembling procedures of the Main Board Unit of SX210 See the following because the disassembling/reassembling C H E C K...
  • Page 156 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Peel off the double-sided tape (x1) that secure the Panel FFC, and remove the Be sure to disconnect the Panel FFC from the connector on the C H E C K Panel FFC from the Panel Board Frame.
  • Page 157 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Unlock the connector (CN2) on the Panel Board B, and disconnect the LCD 11. Remove the screw (x1) that secures the LCD Unit, and remove it from the FFC. Panel Housing. Remove the Panel Board A, B from the Panel Housing.

  • Page 158: Printhead (Sx210 Series)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.8.3 Printhead (SX210 series) When installing each button, securely engage the hooks, or align the dowels and the positioning holes correctly. After See the following because the disassembling/reassembling C H E C K...
  • Page 159 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Do not touch or damage the nozzles or the ink supply needles of the When installing the Printhead, attach it while aligning the C A U T I O N Printhead. positioning holes (x2) on the Printhead and dowels (x2) on the CR Unit.

  • Page 160: Removing The Printer Mechanism (Lower Housing) (Sx210 Series)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 4.8.4 Removing the Printer Mechanism (Lower Housing) Remove the screws (x4) that secure the Printer Mechanism, and remove the Printer Mechanism. (SX210 series) See the following because the disassembling/reassembling C H E C K...
  • Page 161 C H A P T E R ADJUSTMENT Confidential...

  • Page 162: Adjustment Items And Overview

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 5.1 Adjustment Items and Overview In this chapter, the product names are called as follows: C H E C K This chapter describes adjustments required after the disassembly/reassembly of the P O I N T...
  • Page 163 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 5-1. Adjustment Items Adjustment Item Purpose Method Outline Tool • Adjustment Program Initialize PF This resets the counter to maintain paper feed accuracy which decreases due Reset the counter to its default.
  • Page 164 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 5-3. Additional Functions Additional Functions Purpose Method Outline Tool • Adjustment Program Final check pattern A4 size Use this to check if the all adjustments have been The all adjustment patterns are printed automatically.

  • Page 165: Required Adjustments

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 5.1.2 Required Adjustments The table below lists the required adjustments depending upon the parts being repaired or replaced. Find the part(s) you removed or replaced, and check which adjustment(s) must be carried out.
  • Page 166 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Table 5-4. Required Adjustment List Priority Adjustment Item Part Name Remove ASF unit Replace Remove CR unit Replace Remove Upper paper guide Replace Reset to 0 Remove Front paper guide unit Replace Remove...

  • Page 167: Using The Adjustment Program

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 5.2 Using the Adjustment Program 5.2.2 First Dot Position Adjustment The following pattern is printed. This section explains how to judge print samples using the adjustment program. See the appropriate print sample when the printing patterns are different of each model.

  • Page 168: Head Angular Adjustment

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 5.2.3 Head Angular Adjustment MICROWEAVE PATTERN (NX510/SX410 SERIES ONLY) Two patterns are printed as shown below. BAND PATTERN The following pattern is printed. The lines below “1 to 80” are printed while the carriage moves from the home to the other side, and lines below “80 to 1”...

  • Page 169: Bi-D Adjustment

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 5.2.4 Bi-D Adjustment SX410 series The following pattern is printed for each of the four print mode (four dot size NX510/SX210 series modes). The following pattern is printed for each of the four print mode (four dot size modes).

  • Page 170: Pf Adjustment

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 5.2.5 PF Adjustment SX410/SX210 series The following pattern is printed. PF- FOR STANDARD PRINT AREA NX510 series The following pattern is printed. Bottom Figure 5-8. PF (standard print area) Adjustment Printout Pattern How to Judge Examine the printed patches from the left to the right, and select a value for the patch with least white oblique lines on its upper (top) area.

  • Page 171: Pf Band Adjustment

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 5.2.6 PF Band Adjustment PF- FOR BOTTOM MARGIN AREA The following pattern is printed. The following pattern is printed. Upper pattern Lower pattern Figure 5-11. PF (bottom margin area) Adjustment Printout Pattern How to Judge Examine the printout patterns, and enter the value for the pattern with no overlap and gap between the upper and lower ones.

  • Page 172: Bottom Margin Adjustment (Nx510/Sx410 Series Only)

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 5.2.7 Bottom Margin Adjustment (NX510/SX410 series only) The following pattern is printed. -3 -2 -1 Figure 5-13. Bottom Margin Adjustment Printout Pattern How to Judge Measure the length from the bottom edge of the paper to the printed line. Enter the value for the line that is exactly 5 mm away from the bottom edge.

  • Page 173: Mac Address Setting (Nx510 Series Only)

    MAC address cannot be connected to the network. • The default printer name on a network consists of “EPSON” Attach a new MAC address label and the last six digits of the MAC address. Therefore, the on the MB Upper Shield Plate printer name becomes different from the previous one.
  • Page 174 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A Setting procedure The MAC address required on the Adjustment Program is written C A U T I O N on the MAC address label on the MB Upper Shield Plate. Make sure to correctly enter the address.

  • Page 175: Chapter 6 Maintenance

    C H A P T E R MAINTENANCE Confidential...

  • Page 176: Overview

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 6.1 Overview 6.1.2 Service Maintenance If any abnormal print (dot missing, white line, etc.) has occurred or the printer indicates This section provides information to maintain the printer in its optimum condition. the “Maintenance request error” (This error is displayed as “Service Required” in the STM3), take the following actions to clear the error.

  • Page 177: Lubrication

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 6.1.3 Lubrication Refer to the following figures for the lubrication points. <Lubrication Point> The type and amount of the grease used to lubricate the printer parts are determined Driven Pulley based on the results of the internal evaluations. Therefore, be sure to apply the 1.
  • Page 178 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A <Lubrication Point> Front Paper Guide Contact points (x 31) with the EJ Roller. <Lubrication Type> G-74 <Lubrication Amount> 0.04g/point <Remarks> Use a brush to apply G-74. Lubrication Points Figure 6-2. Lubrication on Front Paper Guide (1) <Lubrication Point>...
  • Page 179 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A <Lubrication Point> <Lubrication Point> PF Roller Grounding Spring Contact area with the PF Roller. Cam A and Cam B of the LD Roller shaft <Lubrication Type> <Lubrication Type> G-71 G-71 <Lubrication Amount> φ...
  • Page 180 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A <Lubrication Point> <Lubrication Point> Along the contact areas between Along the contact area between Main Frame the front of the Main Frame the back of the Main Frame and and the CR Unit.
  • Page 181 Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A <Lubrication Point> 1. Protrusion of the Lower Scanner Housing (contact point with the center of the Driven Pulley) 2. On the surface of the Guide Rail of the Lower Scanner Housing. <Lubrication Type>...

  • Page 182: Chapter 7 Appendix

    C H A P T E R APPENDIX Confidential...

  • Page 183: Exploded Diagram / Parts List

    Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A 7.1 Exploded Diagram / Parts List This manual does not provide exploded diagrams or parts list. For the information, see SPI (Service Parts Information). APPENDIX Exploded Diagram / Parts List Confidential...
  • Page 184 www.s-manuals.com...

This manual is also suitable for:

Stylus nx515Stylus tx550wStylus nx415Stylus sx410Stylus sx415Stylus tx410 ... Show all

Table of Contents