Pf Roller - Epson Stylus NX510 Service Manual

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
Whenever the Front Paper Guide, is removed/replaced, the
A D J U S T M E N T
required adjustments must be carried out.
R E Q U I R E D
Chapter 5 " ADJUSTMENT" (p.161)
•
After replacing the Front Paper Guide, be sure to perform the
required lubrication.
• Chapter 6 " MAINTENANCE" (p.175)
DISASSEMBLY/ASSEMBLY

4.5.19 PF Roller

Parts/Components need to be removed in advance
Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot
Cover/Lower Housing/Main Board Unit/Left Frame/Front Frame/Right Frame/CR
Motor/CR Scale/Hopper/Main Frame Assy/ASF Unit/Ink System Unit/Star Wheel
Holder Assy/EJ Roller/Front Paper Guide/PF Encoder Sensor/PF Scale
Removal procedure
C A U T I O N
1. Remove the Spur Gear 13.5 from the PF Roller with a flathead precision
screwdriver or a similar tool.
Disassembling the Printer Mechanism
When removing the PF Roller, be cautious not to touch or damage
the coated surface of the PF Roller.
PF Roller
Spur Gear 13.5
Figure 4-106. Removing the PF Roller (1)
Revision A
138
Confidential