Epson Stylus NX510 Service Manual page 104

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
Tighten the screws in the order given in
The Ink Position Label is not included in the Upper Housing
as an ASP. When replacing the Upper Housing, attach the
label following the instructions below.
NX510 series:
•
Attach it while aligning it with the marking shown below.
Marking
Figure 4-15. Attaching Ink Position Label (NX510 series)
SX410 series:
•
Attach it following the standard below.
17mm
Figure 4-16. Attaching Ink Position Label (SX410 series)
• SX210 series:
Attach it while aligning it with the marking shown below.
Marking
Figure 4-17. Attaching Ink Position Label (SX210 series)
DISASSEMBLY/ASSEMBLY
Figure 4-13.
Ink Position Label
Ink Position Label
Ink Position Label
Removing the Housing
Revision A
104
Confidential