Epson Stylus NX510 Service Manual page 41

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
Trimming Off
• When an image is aligned vertically with the photo frame.
Blank area
• When an image is aligned horizontally with the photo frame.
Blank
area
Figure 1-10. Trimming Function (when trimming is not operated)
PRODUCT DESCRIPTION
Rules on Numbering and Rotating Images
The numbers shown in the figure below indicate the photo frame numbers used for
the print layout. Horizontally oriented images are printed as shown by the
numbers. Vertically oriented images, which has more pixels vertically than
horizontally, the vertical photo data is allocated instead, and the number shown in
the figure below is then rotated 90 degrees before being printed. In Index printing
mode, the numbers are printed as they are shown below, regardless of the shape of
Photo frame
(print area)
the photo data.
However, when the photo data has an equal number of pixels vertically and
horizontally the photos are printed without rotation, regardless of the layout.
NOTE: The vertical photo data refers to when the photo data file itself is set for a
vertical (portrait) orientation. Photo data is defined as the vertical photo
data if it is taken by a digital camera with a portrait position detecting
function.)
Paper top edge
Photo frame
(print area)
Figure 1-11. Rules on Numbering and Rotating Images
Specification for Each Function
<Borderless> <With Border>
Revision A
41
Confidential