Epson Stylus NX510 Service Manual page 157

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
8. Unlock the connector (CN2) on the Panel Board B, and disconnect the LCD
FFC.
9. Remove the Panel Board A, B from the Panel Housing.
10. Remove the Panel FFCs (x2) from the connectors (CN1, CN3) on the Panel
Board B, and the connector (CN1) on the Panel Board A.
Unlocked
Locked
CN1
Panel Board A
Panel Housing
Figure 4-150. Removing the Panel Board
DISASSEMBLY/ASSEMBLY
Lock
Panel FFC
CN3 Panel Board B
CN2
CN1
LCD FFC Panel FFC
Positioning Hole/Pin
Differences in Disassembling/Reassembling SX210 series
11. Remove the screw (x1) that secures the LCD Unit, and remove it from the
Panel Housing.
LCD Unit
Panel Housing
Figure 4-151. Removing the LCD Unit
12. Remove each button from the Panel Housing.
+/−
Power SW button SW button
Mode SW button
Zoom SW button
Figure 4-152. Removing the Switch Button
Revision A
C.B.P. 3x8, F/Zn-3C (4±1kgfcm)
Rib Positioning Hole and Pin
Arrow SW button Stop SW button
Size SW button Start SW button
157
Confidential