Changing Ups Parameter Settings - Toshiba 1600XP SERIES Installation And Operation Manual

Hide thumbs Also See for 1600XP SERIES:
Table of Contents

Advertisement

17.1 Changing UPS Parameter Settings

Press the parameter to be changed and the display will open with an appropriate data entry screen.
Settings that cannot be changed will respond with "Item cannot be changed" shown at the bottom of this
page.
Example 1: Some parameters will display a set of two or more fixed
values.
The UPS is designed to operate with any of several discrete input volt-
ages. The value displayed in the Active Value box is the parameter
(Input Voltage) in use. Alternate values are displayed in keys below the
Active Value box.
Press the correct voltage key, then press Write to load the selected value
to the UPS memory and return to the original parameter screen.
Example 2: Some parameters can be any of a range of values.
The VIUV (Voltage In Under Voltage) Hysterisus can vary over a range.
Press the "Rated Vin" parameter listing and enter the correct value in the
Active Value box using the standard alphanumeric keypad.
Use the back arrow to delete an incorrect keystroke.
After changing the parameter value, press Write to write the entered
value to the UPS memory.
Example 3: Some parameters are informational, some can be changed
by the user, and others can only be changed by a higher security access.
If a parameter cannot be changed under the current security access
level, selecting the parameter for change will generate the message
"Item cannot be changed".
Press OK to return to the original display.
1600XP/XPi Series Installation and Operation Manual – 60616-012
Example 1
96%
100%
INV
12:35 PM
HOME
USR
Main
Monitor
Settings
Records
111 Rated Vin
240V
Quit
208V
230V
240V
Write
4GHI
5JKL
6MNO
7PQRS
8TUV
9WXYZ
0-:
Shift
On-Line
Example 2
INV
12:35 PM
HOME
USR
96%
100%
Main
Monitor
Settings
Records
117 VIUV Hysteresis*
8
Quit
1./
2 ABC
3DEF
Write
4GHI
5JKL
6MNO
7PQRS
8TUV
9WXYZ
0-:
Shift
On-Line
Example 3
96%
100%
INIT
12:35 PM
HOME
USR
Main
Monitor
Settings
Records
Item cannot be changed
OK
1 / 32
DVCOH
ASYN
On-Line
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1600xpi series

Table of Contents