Toshiba 1600XP SERIES Installation And Operation Manual page 77

Unit (Capacity)
Buzzer Volume
Power Connections
Remote Contacts
RS232 ASCII Interface
RemotEye 4
(Standard with XPi)
(Optional with XP)
Mechanical Design
Topology
Size (HxWxD) (max)
Paint System
Fan Panel
2
Battery System
Battery Replacement
Battery Packs
Battery Pack Size
(HxWxD) max.
Battery Pack Quantity
Battery Manufacturer
Battery Type
Toshiba's Part Number for Battery
Pack
1. Input/output figures rated for 240 volts unless otherwise stated. Output ratings given for 0.85PF are only valid when
the input voltage is greater than 204 volts; otherwise, ratings given for 0.70PF are applicable.
2. Remove all sources of main AC power and wait five minutes before replacing fans.
1600XP/XPi Series Installation and Operation Manual – 60616-012
STANDARD MODELS: 3.6 – 10 KVA (CONT'D)
3.6kVA (3.1 kW) 6 kVA (5.1 kW)
1
Standard – Hard wire, Optional – Receptacle Panel w/ Power Cord
Standard (INV, BYP, BATT, LB, AC, FLT)
Toshiba UPS Communication Protocol 2.0
Remote communications package (HTTP/HTTPS, SNMP, Modbus TCP/RTU, BACnet
IP/MSTP) via RJ-45 or RS-485
Unit enclosure is made from sheet metal meeting NEMA1 and UL Type 1
22.1x 10 x 34 in. 27.5 x 10 x 34 in.
(561 x 254 x 864 (699 x 254 x 864
mm) mm)
Panel mounted on back of UPS to allow for easy replacement of fans
Slide out battery packs accessible from front of UPS. Factory or authorized service
Designed for battery acid leakage containment with six (6) batteries per pack
2
51896-FS
8 kVA (6.8 kW)
1
Standard (Fixed Volume)
28.4x 13 x 34.9 in.
(721 x 330 x 886
mm)
Powder coating
center serviceable only.
5.0 x 7.3 x 19.0 in.
(127 x 185 x 483 mm)
3
YUASA
REW45-12FR
10 kVA (8.5 kW)
1 1
28.4x 13 x 34.9 in.
(721 x 330 x 886
mm)
4
60995-FS
A3