Display And Keys; Front Panel Layout; Display Manual Controls - Toshiba 1600XP SERIES Installation And Operation Manual

12. Display and Keys

12.1 Front Panel Layout

The front panel consists of several elements for monitoring and operation of the UPS. Panel components
are shown in the illustration below:
HARDWARE RUN/STOP SWITCH
LCD TOUCH SCREEN
DISPLAY CONTRAST ADJUSTMENT
(MIDDLE LEFT SIDE OF PANEL)

12.2 Display Manual Controls

Hardware Run/Stop Switch – Pressing the contact switch momentarily will toggle the UPS state between
RUN and Bypass. For Instance, while the UPS is in RUN mode, pressing the switch will change the
mode to Bypass. Pressing the switch again will switch the UPS back to RUN mode.
Display Reset Switch – When necessary, the touchscreen display can be reset by using a thin probe,
such as a paper clip, to press the display reset switch.
Display Contrast Adjustment – The display is shipped with the display adjusted for optimum visibility. If
necessary use a trimmer adjustment tool to fine tune the display contrast for improved visibility.
24
96%
HOME
USR
Main
UPS Serial Number
20080112345
UPS Typeform
UXPB2B100C6
DVCOH DVCOH
1600XP
On-Line/Fault
STATUS LEDS (PAGE 25)
1600XP/XPi Series Installation and Operation Manual – 60616-012
100% INV 12:35 PM
Monitor Settings Records
1600
XP
On-Line UPS
UPS Controls
RUN
STOP
ASYN ASYN Shutdown
On-Line UPS
Warning A/C Input
DISPLAY RESET SWITCH
(LOWER RIGHT SIDE OF PANEL)
On-Line