Time And Date - Xorcom XP0150G User Manual

User Guide
Text appears on the LCD screen will change to the selected language.
To change the language for the web user interface:
1. Click on Phone->Preference.
2. Select the desired language from the pull-down list of Web Language.
3. Click Confirm to accept the change.
Text displays on the web user interface will change to the selected language.

Time and Date

The time and date display on the LCD screen when the phone is idle. If the phone
cannot obtain the time and date from the Simple Network Time Protocol (SNTP) server,
contact your system administrator for more information. You can configure the phone
to obtain the time and date from the SNTP server automatically, or configure the time
and date manually.
To configure the SNTP settings via phone user interface:
1. Press Menu->Setting->Basic Settings->Time & Date->SNTP Settings.
2. Press
area from the Time Zone field. The default time zone is "+8 China(Beijing)".
3. Enter the domain names or IP addresses in the NTP Server1 and NTP Server2 fields,
respectively.
4. Press
Saving field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Please refer to
phone.
26
or , or the Switch soft key to select the time zone that applies to your
or , or the Switch soft key to select Automatic from the Daylight
Appendix A - Time Zones
Xorcom XP0150G IP Phone
for the list of available time zones on the IP