Xorcom XP0150G User Manual page 118

User Guide
Volume key when the phone is on-hook and idle. For more information, refer to
on page 33.
Why can't I receive calls?
Check the SIP registration with your system administrator.

Check DND (Do Not Disturb) mode is turned off on your phone. Refer to

Disturb (DND)
Check call forward feature is disabled on the phone. Refer to

page 78.
Check whether the caller number is stored in the blacklist directory. Refer to

Blacklist on page 40.
Why is my handset not working?
Check to ensure that the handset cord is fully connected to both the handset jack on
the phone and handset. Refer to
Why is my headset not working?
Check to ensure that the headset cord is fully connected to the headset jack on

the phone. Refer to
Check to ensure that the headset mode is activated. Refer to

page 48.
Check to ensure that the headset volume is adjusted to an appropriate level. Refer

to Volume
How to change the user password?
You can change the user password via web user interface:
1. Click on Security->Password.
2. Enter the current user password in the Current Password field.
3. Enter the new user password in the New Password field and Confirm Password field.
4. Click Confirm to accept the change.
You can also contact your system administrator for help.
How to reboot the phone?
To reboot the IP phone via web user interface:
1. Click on Phone->Upgrade.
2. Click Reboot to reboot the IP phone.
Note
Any reboot of your phone may take a few minutes.
112
on page 77.
Phone Installation
Phone Installation
on page 33.
Xorcom XP0150G IP Phone
on page 13.
on page 13.
Volume
Do Not
Call Forward on
Headset Use on