Time And Date; Configuring Ntp Server; Configuring Time & Date Manually Using The Phone Interface - Xorcom UC924 User Manual

UC924 IP Phone
3. The default is 0, which means Backlight is always on.
4. Click SaveSet to save the configuration

Time and Date

The time and date are shown on the Home screen, and can be managed manually, or automatically
by an NTP server.

Configuring NTP Server

1. Press Menu → Settings → Basic Setting → Time & Date → NTP Settings
2. Press Left arrow or Right arrow key or Info/Switch soft key to change the Time zone.
3. Enter details of the NTP server1, NTP Server2, and Daylight Saving.
4. Press OK or Save soft key to save the configuration.
Configuring Time & Date manually using the phone interface
1. Press Menu → Settings → Basic Setting → Time & Date → Manual
2. Press Left arrow or Right arrow key to change the time, or use the numeric keypad to input
the correct time.
3. Press OK or Save soft key to save the configuration.
Copyright © 2019 Xorcom Ltd. All rights reserved Page 56 of 193