Xorcom XP0150G User Manual page 85

3) (Optional.) Enter the busy forward on code or off code respectively in
c.) If you select No Answer Forward:
1) Press
2) Enter the destination number you want to forward all unanswered
3) Press
4) (Optional.) Enter the no answer forward on code or off code
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon on the idle screen indicates the call forward is enabled.
You can also configure forward feature via web user interface at the path
Phone->Features->Forward.
Note
You can also enter the SIP URL or IP address in the Forward to field. For more information
on using the SIP URL or IP address, refer to
Call forward feature is local to the phone, and may be overridden by the server settings.
Call forward on code or off code may be different between servers. For more
information, contact your system administrator.
the On Code or Off Code field.
or , or the Switch soft key to select Enable from the No
Answer field.
incoming calls to in the Forward to field.
or , or the Switch soft key to select the ring time to wait
before forwarding in the After Ring Times field (The default ring time is
60 seconds).
respectively in the On Code or Off Code field.
Placing Calls on page 67.
Basic Call Features
79