Area Code; Block Out - Xorcom XP0150G User Manual

Dial-now Time-out
You can configure the interval for dial-now rules. That is, you can configure your phone
to dial out the phone number automatically, which matches a dial-now rule, after the
specified delay time.
To configure the timeout for dial-now rule via web user interface:
1. Click on Phone->Features.
2. Click the "+" sign on the left of the General Information to expand the feature list.
3. Enter the time within 0-14 (in seconds) in the Dial-now Time-out (seconds) field.
4. Click Confirm to accept the change.

Area Code

Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in a country. This feature is necessary only when dialing outside the
code area. For example, area code is configured as "Code: 011, Minimum Length: 4,
Maximum Length: 11", then when you dial out the number "56789", the phone will add
the area code and dial out the number "01156789".
To configure the area code and lengths via web user interface:
1. Click on Phone->Dial Plan->Area Code.
2. Enter the desired values in the Code, Minimum Length (1-15) and Maximum Length
(1-15) fields.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Confirm to accept the change.
Note
The default values of minimum and maximum length are 1 and 15 respectively.

Block Out

You can block the dialing of specific numbers. When you dial a block out number on
your phone, the dialing will fail and the LCD screen will prompt "Forbidden Number".
To add a block out number via web user interface:
1. Click on Phone->Dial Plan->Block Out.
2. Enter the desired value in the Block Out Number field.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Confirm to add the block out number.
Customizing Your Phone
63