Language - Xorcom XP0150G User Manual

To configure the contrast via phone user interface:
1. Press Menu->Setting->Advanced Settings (password: admin) ->Phone
Setting->Contrast.
2. Press
contrast. The default contrast level is 6.
3. Press the Save soft key to accept the change or the Back soft key to cancel.

Language

The default language of the phone user interface is English. The phone will detect and
use the same language as which of your internet browser for the web user interface, if
the language of your internet browser is not supported by the phone, the web user
interface will use English by default. You can change the language for the phone user
interface and the web user interface respectively from each other.
Note
Not all languages are available for selection. The available languages depend on the
language packs currently loaded to the IP phone. Please contact your system
administrator for more information about the available languages of your new phone.
To change the language for the phone user interface:
1. Press Menu->Setting->Basic Settings->Language.
2. Press
3. Press the Save soft key to accept the change.
or , or the Switch soft key to increase or decrease the intensity of
or to select the desired language.
Customizing Your Phone
25