Xorcom XP0150G User Manual page 92

User Guide
You can configure the phone to pick up an incoming call by using the
DPickup/GPickup soft key. You can also configure the call pickup code on a global or
per-line basis via web user interface.
Note
If there are many incoming calls at the same time, press the Gpickup key on the phone
will pick up the call that rings first.
Direct Call Pickup
To enable the direct call pickup via web user interface:
1. Click on Phone->Features.
2. Click the "+" sign on the left of the Call Pickup to expand the feature list.
3. Select Enabled from the pull-down list of Direct Call Pickup.
4. Enter the direct call pickup code in the Direct Call Pickup Code field.
5. Click Confirm to accept the change.
Note
The direct pickup code above is configured on a global, which applies to all accounts.
To configure the direct call pickup code on a per-account basis via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced under the Account tab.
4. Enter the direct call pickup code in the Direct Call Pickup Code field.
5. Click Confirm to accept the change.
86
Xorcom XP0150G IP Phone