Set Wake-Up Screen Saver Using The Web Interface; Gray Level; Changing Gray Level Using The Phone Interface; Time And Date - Xorcom UC912G User Manual

UC912G IP Phone

Set Wake-Up Screen Saver using the web interface

1. Login to the web interface (refer to
Setting → Preference
2. Configure Dial First Digit: Screensaver Wakes up after a single digit is dialed or Screensaver
Wakes up and dials (including the digit that wakes up the phone
3. Click SaveSet to save the configuration

Gray Level

There are 20 gray levels. you can change the LCD's brightness according to your visual perception

Changing Gray Level using the phone interface

1. Press Menu → Settings → Basic Setting → Gray level
2. Press Left arrow or Right arrow key to choose the level from 1 to 20
3. Press OK or Save soft key to save the selected configuration

Time and Date

The time and date are shown on the Home screen, and can be managed manually, or automatically
by an NTP server.

Configuring NTP Server

1. Press Menu → Settings → Basic Setting → Time & Date → NTP Settings
2. Press Left arrow or Right arrow key or Info/Switch soft key to change the Time zone.
3. Enter details of the NTP server1, NTP Server2, and Daylight Saving.
4. Press OK or Save soft key to save the configuration.
Copyright © 2019 Xorcom Ltd.
Web Login for details of the login process) and click
All rights reserved Page 44 of 165