Incoming Intercom Calls - Xorcom XP0150G User Manual

You can also configure an intercom key via web user interface at the path DSS Key.
To place an intercom call:
1. Press the intercom key when the phone is idle.
The phone is automatically connected to the extension specified in the Value field.
2. Press the intercom key again or the Cancel soft key to end the intercom call.

Incoming Intercom Calls

By default, the Xorcom XP0150G IP phone supports to answer an incoming intercom
call automatically. The phone automatically plays a warning tone when it receives an
incoming intercom call. In addition, you can enable the phone to mute the
microphone when it automatically answers an incoming intercom call. You can also
enable the phone to automatically answer an incoming intercom call while there is
already an active call on the phone, the active call is placed on hold.
Intercom features you need to know:
Intercom features
Accept Intercom
Intercom Mute
Warning Tone
Allow Barge In
To configure intercom features via phone user interface:
1. Press Menu->Features->Intercom.
2. Make the desired changes.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also configure these specific parameters via web user interface at the path
Description
Allows you to enable or disable the IP phone to
automatically answer an incoming intercom call.
Allows you to enable or disable the microphone on
the IP phone for Intercom calls.
Allows you to enable or disable a warning tone when
the phone receives an incoming intercom call.
Allows you to enable or disable the IP phone to
automatically answer an incoming intercom call
while there is already an active call on the phone.
Advanced Phone Features
101