Not Registered - Brother DCP-J562DW Online User's Manual

Hide thumbs Also See for DCP-J562DW:
Table of Contents

Advertisement

Error Message
No Paper Fed
No Paper Fed Again
No Response/Busy

Not Registered

Out of Fax Memory
Out of Memory
Paper Size Mismatch
Cause
The machine is out of paper or paper is
not correctly loaded in the paper tray.
The Jam Clear Cover is not closed
correctly.
Paper dust has accumulated on the
surface of the paper pick-up rollers.
Paper dust has accumulated on the
surface of the paper pick-up rollers.
The number you dialled does not answer
or is busy.
You tried to access a Speed Dial number
that has not been stored in the machine.
The fax memory is full.
The machine's memory is full.
The paper size setting does not match the
size of paper in the tray.
-OR-
Action
See Related Information: Replace the Ink
Cartridges.
Do one of the following:
Refill the paper tray, and then press
Mono Start or Colour Start.
Remove and reload the paper, and
then press Mono Start or Colour
Start.
See Related Information: Load Paper.
Make sure the Jam Clear Cover is closed
evenly at both ends.
See Related Information: Printer Jam or
Paper Jam.
Clean the paper pick-up rollers.
See Related Information: Clean the Paper
Pick-up Rollers.
Clean the paper pick-up rollers.
See Related Information: Clean the Paper
Pick-up Rollers.
Verify the number and try again.
Set up the Speed Dial number.
Do one of the following:
Clear the data from the memory. To
gain extra memory, you can turn off
Memory Receive.
See Related Information: Turn Off
Memory Receive.
Print the faxes that are in the memory.
See Related Information: Print a Fax
Stored in the Machine's Memory.
If a fax-sending or copy operation is in
progress:
Press Stop/Exit and wait until the
other operations that are in progress
finish, and then try again.
Press Mono Start or Colour Start to
select Send Now to send the pages
scanned so far.
Press Mono Start or Colour Start to
select Partial Print to copy the
pages scanned so far.
Clear the data in the memory. To gain
extra memory, you can turn off
Memory Receive.
See Related Information: Turn Off
Memory Receive.
Print the faxes that are in the memory.
See Related Information: Print a Fax
Stored in the Machine's Memory.
1. Check that the paper size you chose
on the machine's display matches the
size of the paper in the tray.
440

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j480dwMfc-j680dwMfc-j880dw

Table of Contents