Difficulties
Sent faxes are blank.
Vertical black lines when sending. Black vertical lines on faxes you send are typically caused by dirt or correction
Related Information
•
If You Are Having Difficulty with Your Machine
•
Set Dial Tone Detection
•
Telephone Line Interference/VoIP
•
Troubleshooting
•
Set Tone or Pulse Dialling Mode
•
Choose the Correct Receive Mode
•
Set Fax Detect
•
Set the Number of Rings Before the Machine Answers (Ring Delay)
•
Connect an External TAD
•
External TAD (Telephone Answering Device)
•
Set the Telephone Line Type
•
Print Reports
•
Clean the Scanner
•
Turn Off Memory Receive
•
Print a Fax Stored in the Machine's Memory
•
Cancel a Fax in Progress
•
Check and Cancel a Pending Fax
•
Load Documents in the Automatic Document Feeder (ADF)
•
Load Documents on the Scanner Glass
Suggestions
Make sure you are loading the document correctly.
See Related Information: Load Documents in the Automatic Document Feeder
(ADF).
See Related Information: Load Documents on the Scanner Glass.
fluid on the glass strip. Clean the glass strip.
See Related Information: Clean the Scanner.
480