Home > Glossary
Remote Deactivation Code (Fax/Tel Mode only)
When the machine answers a voice call, it pseudo/double-rings. You can pick up at an extension telephone by
pressing this code (# 5 1).
Remote Retrieval Access
The ability to access your machine remotely from a touch tone telephone.
Remote Setup
The Remote Setup program lets you configure many machine and network settings from a computer application.
When you start this application, the settings on your machine will be downloaded automatically to your computer
and displayed on your computer screen. If you change the settings, you can upload them directly to the machine.
Resolution
The number of vertical and horizontal lines per inch.
Ring Delay
The number of rings before the machine answers in Fax Only and Fax/Tel modes.
Ring Volume
Volume setting for the machine's ring.
Scanning
The process of sending an electronic image of a paper document into your computer.
Search
An alphabetical electronic listing of stored Address Book and Group numbers.
Settings Tables
At-a-glance instructions that show all the settings and options that are available for setting up your machine.
SNMP
The Simple Network Management Protocol (SNMP) is used to manage network devices including computers,
routers and Brother network-ready machines.
SSID
Each wireless network has its own unique network name and it is technically referred to as a Service Set
Identifier (SSID). The SSID is a 32-byte or less value and is assigned to the access point. The wireless network
devices you want to associate to the wireless network should match the access point. The access point and
wireless network devices regularly send wireless packets (referred to as beacons), which contain the SSID
623