Clean The Scanner - Brother DCP-J562DW Online User's Manual

Home > Routine Maintenance

Clean the Scanner

1. Unplug the machine from the electrical socket.
2. Lift the document cover (1). Clean the scanner glass (2) and the white plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass cleaner.
1
3. In the ADF unit, clean the white bar (1) and the glass strip (2) with a lint-free cloth moistened with a non-
flammable glass cleaner. (ADF models only)
1
2
(ADF models only)
In addition to cleaning the scanner glass and glass strip with a non-flammable glass cleaner, run your
fingertip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again
concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make
a copy after each cleaning attempt.
When there is a spot of dirt or correction fluid on the glass strip, the printed sample shows a vertical line.
After the glass strip is cleaned, the vertical line is gone.
> Clean Your Brother Machine
3
2
> Clean the Scanner
502