Set Your Station Id - Brother DCP-J562DW Online User's Manual

Home > Machine Settings
Your Station ID

Set Your Station ID

Related Models: MFC-J480DW/MFC-J680DW/MFC-J880DW
Set the machine's Station ID if you want the date and time to appear on each fax you send.
>> MFC-J480DW
>> MFC-J680DW/MFC-J880DW
MFC-J480DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Station ID]. Press OK.
3. Enter your fax number (up to 20 digits) using the dial pad, and then press OK.
4. Enter your name (up to 20 characters) using the dial pad, and then press OK.
For more information about how to enter text, see the Appendix.
5. Press Stop/Exit.
MFC-J680DW/MFC-J880DW
1. Press [Settings] > [All Settings] > [Initial Setup] > [Station ID].
2. Press [Fax].
3. Enter your fax number (up to 20 digits) on the Touchscreen, and then press [OK].
4. Press [Name].
5. Enter your name (up to 20 characters) using the Touchscreen, and then press [OK].
• Press
differ depending on your country.)
• If you entered an incorrect character and want to change it, press d or c to move the cursor to it. Press
and then enter the correct character.
• To enter a space, press [Space].
6. Press .
Related Information
• General Settings
• Transfer Faxes to Another Fax Machine
• Transfer the Fax Journal Report to Another Fax Machine
• Enter Text on Your Brother Machine
• Set the Date & Time
> Change Machine Settings from the Control Panel
to cycle between letters, numbers and special symbols. (The available characters may
> General Settings > Set
547